Qantas Airways Limited - Qantas Calibration Services Melbourne

Site

Qantas Calibration Services Melbourne

Accreditation No.

15761

Site No.

16966

Date of Accreditation

01 Oct 2008

Address

Ground floor, Avionics building, Gate 23, Operations Road
Melbourne Airport, VIC 3045
Australia

Contact

Mr Wilson Yang P: +61 (03) 92807656

Availability

Services available to external clients

Qantas Airways Limited - Qantas Calibration Services Melbourne address map

Scope of Accreditation

Print scopes
Qantas Calibration Services Melbourne

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
DC and low frequency electrical metrology - Electrical measurement and test equipment Ammeters; Capacitance meters; Digital multimeters (DMM); Ohm meters; Voltmeters AC current; AC voltage; Capacitance; DC current; DC voltage; Frequency; Resistance Comparison with a reference standard

Capability

with Calibration and Measurement Capability of
DC voltage
18 µV/V or 4 µV whichever is greater from 0 V to 1000 V

DC current
160 µA/A or 0.028 µA whichever is greater from 0 A to 1 mA
130 µA/A or 160 µA whichever is greater above 1 mA to 100 mA
200 µA/A above 100 mA to 1 A
700 µA/A above 1 A to 10 A

AC voltage
360 µV/V or 40 µV whichever is greater from 1 mV to 1000 V at 10 Hz to 50 kHz
840 µV/V or 110 µV whichever is greater from 1 mV to 10 V at 50 kHz to 100 kHz
2.4 mV/V or 230 µV whichever is greater from 1 mV to 3 V at 100 kHz to 300 kHz
2.0 mV/V above 10 V to 100 V at 50 kHz to 100 kHz

AC current
2 mA/A or 0.4 µA whichever is greater from 100 µA to 100 mA at 10 Hz to 5 kHz
4.2 mA/A or 0.8 µA whichever is greater from 100 µA to 100 mA at 5 kHz to 10 kHz
1.6 mA/A above 100 mA to 10 A at 45 Hz to 1 kHz
5.5 mA/A above 100 mA to 1 A at 1 kHz to 5 kHz
24 mA/A above 100 mA to 1 A at 5 kHz to 10 kHz

Resistance
0.150 mΩ/ Ω +1.4 mΩ from 0 Ω to 10 Ω
0.051 mΩ/ Ω above 10 Ω to 100 Ω
0.032 mΩ/ Ω above 100 Ω to 100 kΩ
0.057 mΩ/ Ω above 100 kΩ to 1 MΩ
0.12 mΩ/ Ω % above 1 MΩ to 10 MΩ
0.43 mΩ/ Ω above 10 MΩ to 100 MΩ
1.4 % above 100 MΩ to 1 GΩ

Capacitance
0.4% or 1.2nF whichever is greater from 0 to 10 µF
0.51% above 10 µF to 10 mF
0.65% above 10 mF to 100 mF

Frequency
2.5 µHz/Hz from 10 Hz to 300 kHz
Pressure metrology - Pressure and vacuum measuring equipment Digital pressure gauges; Mechanical pressure gauges; Vacuum gauges Gauge pressure By pressure calibrator; Comparison with dead weight tester

Capability

With calibration and measurement capability of -

For Digital gauges
0.015% of reading or 0.0038 kPa (whichever is greater) in the range from 0 kPa to 70 MPa 

For Mechanical gauges

0.02% of reading or 1.4 kPa (whichever is greater) in the range from 0 kPa to 70 MPa 


For Vacuum gauges
0.02 kPa in the range from -95 kPa to 0 kPa
Temperature metrology - Temperature measuring equipment Metallic resistance thermometers Temperature Comparison with a reference standard

Capability

with Calibration and Measurement Capability of
0.11 ºC  form -40 ºC to 200 ºC 
Torque - Torque measuring and testing equipment Torque indicators; Torque transducers; Torque wrenches Torque Comparison with a reference standard

Capability

With calibration and measurement capability of - 

For Torque wrenches

1.5% of reading in the range from 0.5 Nm to 813 Nm


For Torque transducers and Torque Indicators
0.2% of reading in the range from 0.5 Nm to 813 Nm
Torque - Torque standards Torque calibrating equipment Torque Gravimetric measurement with reference beam

Capability

With calibration and measurement capability of - 

0.2% of reading in the range from 0.5 Nm to 813 Nm

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.