Raytheon Australia Pty Ltd

Site

Raytheon Australia ASTE Calibration Lab

Accreditation No.

19238

Site No.

21842

Date of Accreditation

02 Apr 2014

Address

101 Southgate Ave
Cannon Hill, QLD 4170
Australia

raytheon.com.au

Contact

Mr Steven Gregory Moore P: +61 (07) 37182450

Availability

Services available to external clients

Scope of Accreditation

Raytheon Australia ASTE Calibration Lab

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
DC and low frequency electrical metrology - Electrical measurement and test equipment Ammeters; Current clamps; Digital multimeters (DMM); Insulation resistance test equipment; Ohm meters; Voltmeters AC current; AC voltage; DC current; DC voltage; Resistance Direct measurement against a reference standard

Capability

with Calibration and Measurement Capability of -

AC Voltage
0.06% of Reading from 100 mV to 1 V and from 20 Hz to 10 kHz
0.16% of Reading from 100 mV to 1 V and from above 10 kHz to 50 kHz
0.42% of Reading from 100 mV to 1 V and from above 50 kHz to 100 kHz
0.06% of Reading from above 1 V to 10 V and from 20 Hz to 10 kHz
0.16% of Reading from above 1 V to 10 V and from above 10 kHz to 50 kHz
0.06% of Reading from above 10 V to 100 V and from 45 Hz to 10 kHz
0.35% of Reading from above 10 V to 100 V and from above 10 kHz to 50 kHz
0.06% of Reading from above 100 V to 1000 V and from 45 Hz to 10 kHz

DC Voltage
0.02% of Reading + 0.006 mV from 0 V to 1000 V

DC Current
0.03% of Reading + 0.04 μA from 0 μA to 100 mA
0.09% of Reading from above 100 mA to 10 A
Clamp Meters
0.9% of Reading + 0.15 A from 20 A to 1000 A

AC Current
0.3% of Reading + 0.0001 mA from 1 mA to 10 mA and from 20 Hz to 1 kHz
0.3% of Reading + 0.005 mA from 1 mA to 10 mA and from above 1 khz to 10 kHz
0.3% of Reading from above 10 mA to 100 mA and from 20 Hz to 1 kHz
0.45% of Reading from above 10 mA to 100 mA and from above 1 khz to 10 kHz
0.3% of Reading from above 100 mA to 1 A and from 20 Hz to 1 kHz
4.3% of Reading from above 100 mA to 1 A and from above 1 kHz to 10 kHz
0.3% of Reading from above 1 A to 10 A and from 45 Hz to 1 kHz
4.3% of Reading from above 1 A to 10 A and from above 1 kHz to 10 kHz
Clamp Meters
1.2% of Reading + 0.5 A from 20 A to 100 A and from 45 Hz to 400 Hz
1.3% of Reading + 1 A from above 100 A to 1000 A and from 45 Hz to 400 Hz

Resistance
0.02% of Reading + 0.03 Ω from 10 Ω to 1 MΩ
0.03% of Reading from above 1 MΩ to 10 MΩ
0.2% of Reading from above 10 MΩ to 100 MΩ
2.5% of Reading from above 100 MΩ to 500 MΩ

Insulation Resistance (up to 1000 V)
0.02% of Reading + 0.03 Ω from 10 Ω to 1 MΩ
0.03% of Reading from above 1 MΩ to 10 MΩ
0.2% of Reading from above 10 MΩ to 100 MΩ
2.5% of Reading from above 100 MΩ to 500 MΩ
Pressure metrology - Pressure and vacuum measuring equipment Mechanical pressure gauges Gauge pressure By pressure calibrator MSA Test Method 2

Capability

With Calibration and Measurement Capability of-

0.07% of reading or 0.21 kPa (whichever is greater) from 3.5 kPa to 69 MPa

Temperature metrology - Ancillary temperature measuring equipment Digital voltmeters (DVM) and digital multimeters (DMM) Volt to temperature conversion Direct measurement by electrical input

Capability

with Calibration and Measurement Capability of -

Thermocouple devices (measure mode):
Type K thermocouple:
0.85 °C from -200 °C to 1300 °C
Time and frequency metrology - Frequency, time and waveform measuring equipment Frequency meters Frequency Measurement against reference standard

Capability

with Calibration and Measurement Capability of -

0.02% of Reading + 0.004 Hz from 10 Hz to 500 kHz

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.