National Association of Testing Authorities, Australia
Scope of Accreditation
Construction Sciences Pty Ltd
Site
Sunshine Coast Laboratory
Accreditation No.
1986
Site No.
3740
Date of Accreditation
22 Jun 1992
Contact
Availability
Services available to external clients
Scope of Accreditation
ISO/IEC 17025 (2017)
Environment
Service | Product | Determinant | Technique | Procedure |
---|---|---|---|---|
Analysis for physical and chemical characteristics | Soils | Sulfur peroxide (SP) | Colourimetry | AS 4969.5 |
Net acid soluble sulfur (SNAS, SNAS) | Calculation | AS 4969.11 | ||
Sulfur - Peroxide oxidisable (SPOS) | Calculation | AS 4969.10 | ||
Sulfur potassium chloride extractable (SKCl) | Titration | AS 4969.4 | ||
Acid neutralising capacity (ANC); Acidity - Titratable peroxide (TPA); pH - Peroxide (pHOX) | Titration | AS 4969.3 | ||
Sulfate - Water soluble | Gravimetric | BS1377 parts 1, 3 (section 5) | ||
Acid neutralising capacity - Back titration (ANCBT) | Titration | AS 4969.13 | ||
Hydrochloric acid extractable sulfur (SHCl, SHCl) | Colourimetry | AS 4969.8 | ||
Acidity - Titratable actual (TAA); pH - Potassium chloride (pHKCl) | Titration | AS 4969.2 | ||
Suspension peroxide oxidation combined acidity and sulfur (SPOCAS) | Titration | AS 4969.12 | ||
Sulfur - Chromium reducible | Titration | AS 4969.7 | ||
Acidity - Titratable sulfidic (TSA) | Calculation | AS 4969.9 | ||
Soils - Acid sulfate | Sulfur - Acid extractable in soil residue after peroxide oxidation (SRAS) | Colourimetry | AS 4969.6 | |
Sample collection | Soils | Not applicable | Manual by hand | AS 4969.1 |
ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
Service | Product | Determinant | Technique | Procedure | Limitations |
---|---|---|---|---|---|
Establishment of annex facilities | Materials defined by all or some for which the site is accredited | Determinations defined by all or some for which the site is accredited | Techniques defined by all or some for which the site is accredited | ||
Evaluation of geotechnical and civil construction material - Aggregate abrasion | Aggregates | Abrasion resistance | Resistance to wear by attrition | MR (Qld) Method Q229A, MR (Qld) Method Q229B, ASTM D7428, ASTM D6928. | |
Evaluation of geotechnical and civil construction material - Aggregate binder adhesion | Aggregates | Degree of precoating | Not applicable | MR (Qld) Method Q216 | |
Evaluation of geotechnical and civil construction material - Aggregate contaminants | Aggregates | Weak particles contaminants | Sieve analysis | AS 1141.32 | |
Clay and fine silt | Settling | AS 1141.33 | |||
Organic impurities | Colour test | AS 1141.34 | |||
Evaluation of geotechnical and civil construction material - Aggregate properties | Aggregates | Particle density of coarse aggregate; Particle density of fine aggregate; Water absorption of coarse aggregate; Water absorption of fine aggregate | Weighing-in-water | AS 1141.5, AS 1141.6.1 | |
Particle size distribution | Sieve analysis; Sieve analysis of material finer than 75 µm | AS 1141.11.1, AS 1141.12 | |||
Shape | Average least dimension; Crushed faces; Flakiness; Proportional calliper | AS 1141.14, AS 1141.15, AS 1141.18, AS 1141.20.1, AS 1141.20.3, MR (Qld) Method Q201 | |||
Bulk density | Compacted; Uncompacted | AS 1141.4 | |||
Evaluation of geotechnical and civil construction material - Aggregate soundness | Aggregates | Soundness | Degradation factor on coarse aggregate; Degradation factor on source rock; Exposure to sodium sulfate solution | AS 1141.24, AS 1141.25.1, AS 1141 25.2 | |
Evaluation of geotechnical and civil construction material - Aggregate strength | Aggregates | Wet/dry strength variation | Not applicable | AS 1141.22 | |
Aggregate crushing value | Not applicable | AS 1141.21 | |||
Wet/dry strength variation | Not applicable | MR (Qld) Method Q205A (2018), MR (Qld) Method Q205B (2018) | |||
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar chemical tests | Concrete, grout and mortar | Chloride penetration resistance | Nordtest method | NT Build Method 443 | |
Chloride level in hardened concrete | Nitric acid | AS 1012.20 (1992) | |||
Chloride level in hardened concrete | Water soluble | AS 1012.20.2 | |||
Carbonation | Carbonation of concrete | MRWA Method WA 620.1 | |||
Chloride migration coefficient | Nordtest method | NT Build Method 492 | |||
Chloride level in hardened concrete | Nitric acid | AS 1012.20 (1992), AS 1012.20.1 | |||
Sulfate level in hardened concrete | Nitric acid | AS 1012.20 (1992), AS 1012.20.1 | |||
Chloride level in hardened concrete | Volhard titration | NT Build Method 208 | |||
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in situ | Concrete, grout and mortar | Slump flow | Cone; J-ring; T500 | AS 1012.3.1, AS 1012.3.5 | |
Compactibility index | AS 1012.3.4 | ||||
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar properties | Concrete, grout and mortar | Mass per unit volume - Fresh concrete | In situ measurement using fixed volume measure | AS 1012.5 | |
Mass per unit volume - Hardened concrete | Dimensions | AS 1012.12.1 | |||
Compressive strength | Core; Cube; Cylinder | AS 1012.9, AS 1012.14 | |||
Bleeding | In situ analysis - Freshly mixed concrete | AS 1012.6 | |||
Air content of freshly mixed concrete | Increased air pressure | AS 1012.4.1 | |||
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curing | Concrete, grout and mortar | Specimen manufacture and curing | AS 1012.8.1, AS 1012.8.4, AS 1012.14 | ||
Evaluation of geotechnical and civil construction material - Soil chemical properties | Soils | Chloride | Titration | RMS (NSW) Method T1010, MR (Qld) Method Q130B | |
Soluble sulfate | Acid extraction | RMS (NSW) Method T1011, MR (Qld) Method Q131B | |||
Evaluation of geotechnical and civil construction material - Soil classification | Soils | Moisture content | Correlation; Drying oven; Hot plate; Infrared light | AS 1289.2.1.1, AS 1289.2.1.6, AS 1289.2.3.1, RMS (NSW) Method T120 TfNSW TS 02795.14 | |
Sieve analysis | Not applicable | AS 1289.3.6.1 MR (Qld) Method Q103A, MR (Qld) Method Q103A (2018) | |||
Linear shrinkage; Liquid limit; Plastic limit; Plasticity index | Casagrande; Casagrande four point; Casagrande one point; Cone; Cone four point; Cone one point | AS 1289.3.1.1, AS 1289.3.1.2, AS 1289.3.2.1, AS 1289.3.3.1, AS 1289.3.3.2, AS 1289.3.4.1, AS 1289.3.9.1, MR (Qld) Method Q104A, MR (Qld) Method Q104D, MR (Qld) Method Q105, MR (Qld) Method Q106 | |||
Sieve analysis; Weighted plasticity index | Fines ratio; Not applicable | MR (Qld) Method Q252, MR (Qld) Method Q253 | |||
Particle density | Gravimetric | AS 1289.3.5.1 | |||
Evaluation of geotechnical and civil construction material - Soil compaction characteristics | Soils | Assignment of optimum moisture content/maximum dry density (OMC/MDD) | Not applicable | AS 1289.5.4.2 MR (Qld) Method Q144A | |
Minimum and maximum dry density | AS 1289.5.5.1 | ||||
Oversize material | Oversize material treatment | MR (Qld) Method Q143 | |||
Dry density/moisture content relationship | Modified compactive effort; Standard compactive effort | AS 1289.5.1.1, AS 1289.5.2.1 MR (Qld) Method Q142A, MR (Qld) Method Q142B | |||
Compaction to nominated levels | Not applicable | MR (Qld) Method Q145A | |||
Evaluation of geotechnical and civil construction material - Soil dispersion | Soils | Dispersion | Emerson class; Percentage (%); Pinhole | AS 1289.3.8.1, AS 1289.3.8.2, AS 1289.3.8.3, MR (Qld) Method Q168 | |
Evaluation of geotechnical and civil construction material - Soil electrical properties | Soils | Electrical resistance | Not applicable | AS 1289.4.4.1, TfNSW TS 02795.43 | |
Evaluation of geotechnical and civil construction material - Soil field density | Soils | Density - In situ | Nuclear gauge; Sand-cone | AS 1289.5.3.1, AS 1289.5.8.1 MR (Qld) Method Q141A, MR (Qld) Method Q141B, MR (Qld) Method NGTM N01, MR (Qld) Method NGTM N02, MR (Qld) Method NGTM N03 | |
Compaction control | Hilf | AS 1289.5.7.1 | |||
Degree of saturation | Not applicable | MR (Qld) Method Q146 | |||
Characteristic field density values | Not applicable | MR (Qld) Method Q020 | |||
Density index | Not applicable | AS 1289.5.6.1 | |||
Dry density ratio | Calculation | AS 1289.5.4.1 | |||
Relative compaction | Not applicable | MR (Qld) Method Q140A | |||
Evaluation of geotechnical and civil construction material - Soil fine particles | Soils | Fine particle analysis | Hydrometer | AS 1289.3.6.3 | |
Evaluation of geotechnical and civil construction material - Soil in situ penetration | Soils | Penetration in situ | Dynamic cone | AS 1289.6.3.2, | |
Evaluation of geotechnical and civil construction material - Soil in situ strength | Soils | Shear strength - In situ | Vane | AS 1289.6.2.1 | |
Evaluation of geotechnical and civil construction material - Soil laboratory bearing properties | Soils | Bearing ratio | Remoulded specimens | AS 1289.6.1.1 | |
Evaluation of geotechnical and civil construction material - Soil natural contaminants | Soils | Acidity | pH | AS 1289.4.3.1 RMS (NSW) Method T123, RMS (NSW) Method T1002 TfNSW TS 02794.01,TfNSW TS 02795.16 | |
Evaluation of geotechnical and civil construction material - Soil permeability | Soils | Permeability | Constant head for a remoulded specimen; Falling head for a remoulded specimen | AS 1289.6.7.1, AS 1289.6.7.2 | |
Evaluation of geotechnical and civil construction material - Soil pre-treatment | Soils | Soil pre-treatment | Not applicable | AS 1289.1.1 MR (Qld) Method Q101, MR (Qld) Method Q101A, MR (Qld) Method Q101B, MR (Qld) Method Q101G, MR (Qld) Method Q101H, MR (Qld) Method Q101J, MR (Qld) Method Q255 TfNSW T105 TfNSW TS 02795.01 | |
Evaluation of geotechnical and civil construction material - Soil stabilisation | Soils | Cement content | Heat of neutralisation | MR (Qld) Method Q134 | |
Compressive strength | Uniaxial unconfined | MR (Qld) Method Q115 | |||
Sample preparation | UCS (unconfined compression strength) specimens - Field mix; UCS (unconfined compression strength) specimens - Laboratory mix | MR (Qld) Method Q251A, MR (Qld) Method Q251B | |||
Sample preparation | Cement stabilisation; Lime stabilisation | MR (Qld) Method Q135A, MR (Qld) Method Q135B | |||
Sample collection | Aggregates | Not applicable | Aggregate from a bin; Aggregate from a pavement; Aggregate from a stockpile | AS 1141.3.1 | |
Concrete, grout and mortar | Not applicable | Fresh concrete from a mixer; Fresh concrete from deposited concrete; Hardened concrete by coring | AS 1012.1, AS 1012.14 | ||
Soils | Not applicable | Site selection - Random sampling; Site selection - Random stratified sampling | AS 1289.1.4.1, AS 1289.1.4.2 MR (Qld) Method Q050 | ||
Not applicable | Disturbed sampling from earthwork; Disturbed soil sampling from a face; Disturbed soil sampling from a pavement; Disturbed soil sampling from a stockpile; Disturbed soil sampling from a windrow; Disturbed soil sampling in situ; Site selection by spot sampling | AS 1289.1.2.1 MR (Qld) Method Q060, MR (Qld) Method Q061 |
ISO/IEC 17025 (2017)
Environment
Service | Product | Determinant | Technique | Procedure |
---|---|---|---|---|
Analysis for physical and chemical characteristics | Soils | Sulfur potassium chloride extractable (SKCl) | Titration | AS 4969.4 |
Hydrochloric acid extractable sulfur (SHCl, SHCl) | Colourimetry | AS 4969.8 | ||
Sulfur - Acid extractable in soil residue after peroxide oxidation (SRAS) | Colourimetry | AS 4969.6 | ||
Acid neutralising capacity - Back titration (ANCBT) | Titration | AS 4969.13 | ||
Net acid soluble sulfur (SNAS, SNAS) | Calculation | AS 4969.11 | ||
Acidity - Titratable actual (TAA); pH - Potassium chloride (pHKCl) | Titration | AS 4969.2 | ||
Sulfur - Chromium reducible | Titration | AS 4969.7 | ||
Sulfur - Peroxide oxidisable (SPOS) | Calculation | AS 4969.10 | ||
Acidity - Titratable sulfidic (TSA) | Calculation | AS 4969.9 | ||
Acid neutralising capacity (ANC); Acidity - Titratable peroxide (TPA); pH - Peroxide (pHOX) | Titration | AS 4969.3 | ||
Sulfur peroxide (SP) | Colourimetry | AS 4969.5 | ||
Sulfate - Water soluble | Gravimetric | BS 1377 parts 1, 3 (section 5) | ||
Suspension peroxide oxidation combined acidity and sulfur (SPOCAS) | Titration | AS 4969.12 | ||
Acid producing potential of acid sulfate | Calculation | AS 4969.14 | ||
Sample collection | Soils | Not applicable | Manual by hand | AS 4969.1 |
ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
Service | Product | Determinant | Technique | Procedure | Limitations |
---|---|---|---|---|---|
Evaluation of geotechnical and civil construction material - Aggregate properties | Aggregates | Particle size distribution | Sieve analysis | AS 1141.11.1 | |
Evaluation of geotechnical and civil construction material - Aggregate soundness | Aggregates | Soundness | Exposure to sodium sulfate solution | AS 1141.24 | |
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar chemical tests | Concrete, grout and mortar | Chloride level in hardened concrete | Volhard titration | NT Build Method 208 | |
Chloride level in hardened concrete | Nitric acid | AS 1012.20 (1992) | |||
Chloride migration coefficient | Nordtest method | NT Build Method 492 | |||
Sulfate level in hardened concrete | Nitric acid | AS 1012.20 (1992), AS 1012.20.1 | |||
Chloride penetration resistance | Nordtest method | NT Build Method 443 | |||
Chloride level in hardened concrete | Volhard titration | AS 1012.20.2 | |||
Carbonation | Carbonation of concrete | MRWA Method WA 620.1 | |||
Chloride level in hardened concrete | Nitric acid | AS 1012.20 (1992), AS 1012.20.1 | |||
Evaluation of geotechnical and civil construction material - Soil chemical properties | Soils | Soluble sulfate | Acid extraction | RMS (NSW) Method T1011, MR (Qld) Method Q131B | |
Chloride | Titration | RMS (NSW) Method T1010, MR (Qld) Method Q130B | |||
Evaluation of geotechnical and civil construction material - Soil classification | Soils | Sieve analysis | Not applicable | AS 1289.3.6.1 | |
Moisture content | Drying oven | AS 1289.2.1.1, RMS (NSW) Method T120 TfNSW TS 02795.14 | |||
Particle density | Gravimetric | AS 1289.3.5.1 | |||
Evaluation of geotechnical and civil construction material - Soil dispersion | Soils | Dispersion | Emerson class; Percentage (%); Pinhole | AS 1289.3.8.1, AS 1289.3.8.2, AS 1289.3.8.3 | |
Evaluation of geotechnical and civil construction material - Soil electrical properties | Soils | Electrical resistance | Not applicable | AS 1289.4.4.1, MR (Qld) Method Q122B, RMS (NSW) Method T185 TfNSW TS 02795.43 | |
Evaluation of geotechnical and civil construction material - Soil fine particles | Soils | Fine particle analysis | Hydrometer | AS 1289.3.6.3 | |
Evaluation of geotechnical and civil construction material - Soil natural contaminants | Soils | Acidity | pH | AS 1289.4.3.1 RMS (NSW) Method T123, RMS (NSW) Method T1002 TfNSW TS 02794.01,TfNSW TS 02795.16 | |
Evaluation of geotechnical and civil construction material - Soil pre-treatment | Soils | Soil pre-treatment | Not applicable | AS 1289.1.1, MR (Qld) Method Q101, MR (Qld) Method Q101A, MR (Qld) Method Q101B, TfNSW T105 TfNSW TS 02795.01 | |
Sample collection | Aggregates | Not applicable | Aggregate from a bin; Aggregate from a pavement; Aggregate from a stockpile | AS 1141.3.1 | |
Soils | Not applicable | Disturbed sampling from earthwork; Disturbed soil sampling from a face; Disturbed soil sampling from a pavement; Disturbed soil sampling from a stockpile; Disturbed soil sampling from a windrow; Disturbed soil sampling in situ | AS 1289.1.2.1 |
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
Accreditation No.
1986
Site No.
3740
Print date
21 Jan 2025