Neil Mansell Concrete

Site

Toowoomba Laboratory

Accreditation No.

18621

Site No.

21819

Date of Accreditation

17 Oct 2013

Address

550A Alderley Street
Harristown, QLD 4350
Australia

mansell.com.au

Contact

Mr Rodney Evans P: +61 (07) 46342911

Availability

Services conditionally available to external clients

Neil Mansell Concrete address map

Scope of Accreditation

Print scopes
Toowoomba Laboratory

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Establishment of annex facilities Materials defined by all or some for which the site is accredited Determinations defined by all or some for which the site is accredited Techniques defined by all or some for which the site is accredited
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in situ Concrete, grout and mortar Slump flow Cone

AS 1012.3.1

Slump flow J-ring; T500 AS 1012.3.5
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar permeability Concrete, grout and mortar Permeability Chloride migration ASTM C1202
Permeability Volume change with water absorption - Permeable voids AS 1012.21
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar properties Concrete, grout and mortar Compressive strength Cylinder

AS 1012.9

Mass per unit volume - Fresh concrete In situ measurement using fixed volume measure

AS 1012.5

Bleeding In situ analysis - Freshly mixed concrete

AS 1012.6

Air content of freshly mixed concrete Increased air pressure

AS 1012.4.1

Mass per unit volume - Hardened concrete Dimensions

AS 1012.12.1

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curing Concrete, grout and mortar Specimen manufacture and curing Curing flexural strength specimens in the laboratory; In situ manufacture and curing of flexural strength specimens AS 1012.8.2
Specimen manufacture and curing In situ manufacture and curing of drying shrinkage specimens; Manufacture and curing of drying shrinkage specimens in the laboratory

AS 1012.8.4

Specimen manufacture and curing Curing cylinder specimens in the laboratory; In situ manufacture and curing of cylindrical specimens; Manufacture and curing of cylindrical specimens in the laboratory

AS 1012.8.1

Specimen manufacture and curing In situ manufacture and curing of grout and mortar cubes; Manufacture and curing of grout and mortar cubes in the laboratory

AS 1012.8.3

Sample collection Concrete, grout and mortar Not applicable Fresh concrete from deposited concrete

AS 1012.1

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.