Home / Accredited Test Services

Accredited Test Services

Site

Accredited Test Services

Accreditation No.

502

Site No.

720

Date of Accreditation

13 Aug 1968

Address

2153 Melbourne-Lancefield Road
Monegeetta, VIC 3433
Australia

Contact

Mr Vince Marino P: +61 (03) 44315128

Availability

Services not available to external clients

Scope of Accreditation

Print scopes

Accredited Test Services

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service	Product	Determinant	Technique	Procedure	Limitations
Evaluation of environmental durability of assets and equipment	Military equipment	Effect of environmental exposure	Damp heat	DEF-STAN 07-55 (Test B6, B7, B8); DEF-STAN 00-35 (Test CL6, CL7); MIL-STD-810 (Test 507)	Limited to 95% RH
		Effect of environmental exposure	Shock (impact)	DEF-STAN 07-55 (Tests A3, A4, A5, A8, A9, A13, B7, B8); DEF-STAN 00-35 (Tests M3, M4, M5, M11, M12); MIL-STD-810 (Test 516)	Limited to 95% RH
		Effect of environmental exposure	Driving rain, mist, drip	DEF-STAN 07-55 (Tests D2, D3, D4); DEF-STAN 00-35 (Tests CL27, CL28, CL 29); MIL-STD-810 (Test 506)	Trucks and troop carriers
		Effect of environmental exposure	Cold	DEF-STAN 07-55 (Tests B4, B5); DEF-STAN 00-35 (Tests CL4, CL5); MIL-STD-810 (Test 502)	Cold tests in the range down to -40ºC
		Effect of environmental exposure	Dust	DEF-STAN 00-35 (Test CL-25: Turbulent dust test only)
		Effect of environmental exposure	Dry heat	DEF-STAN 07-55 (Tests B1, B2); DEF-STAN 00-35 (Test CL1); MIL-STD-810 (Test 501)
		Effect of environmental exposure	Immersion	DEF-STAN 07-55 (Test D5); DEF-STAN 00-35 (Test CL29); MIL-STD-810 (Test 512)
		Effect of environmental exposure	Solar radiation	DEF-STAN 07-55 (Test B3); DEF-STAN 00-35 (Test CL2); MIL-STD-810 (Test 505)
		Effect of environmental exposure	Vibration	DEF-STAN 07-55 (Tests A1, A2); DEF-STAN 00-35 (Tests M1, M3); MIL-STD-810 (Test 514); MIL-STD-167
		Effect of environmental exposure	Corrosion resistance	DEF-STAN 07-55 (Tests C2, C4, C5, C6); MIL-STD-810 (Test 509)	Limited to 95% RH
		Effect of environmental exposure	Low air pressure	DEF-STAN 07-55 (Tests B11, B12); DEF-STAN 00-35 (Test CL21); MIL-STD-810 (Test 500)	up to 52,000 feet
Evaluation of geometric properties of structures and equipment	Equipment modules; Structures and assemblies	Centre of gravity	Single and multiple compression load cells; Single and multiple suspension using tension load cells	in-house method QAEL-INST-10
Evaluation of load generating lifting appliances	Winches	Proof load	Not applicable	in-house method QAEL-INST-45

ISO/IEC 17025 (2017)

Manufactured Goods

Service	Product	Determinant	Technique	Procedure	Limitations
Electrical equipment approval and safety evaluation	Electrical appliances, coupling devices and accessories; Enclosures for electrical equipment	Effect of environmental exposure on electrical equipment and enclosures	Cold; Damp heat; Dry heat; Humidity; Shock (impact); Solar radiation; Temperature; Vibration	DEF-STAN 07-55 (Tests A1, A2, A3, A4, A5, A8, A9, A13, B1, B2, B3, B4, B5, B6, B7, B8, B11, B12, B14, C2, C4, C5, C6, D2, D3, D4, D5, D6); DEF-STAN 00-35 (Tests CL1, CL2, CL4, CL5, CL6, CL7, CL14, CL21, CL25-turbulent dust test only, CL27, CL28, CL29, CL30, M1, M3, M4, M5, M11, M12); MIL-STD-810 (Tests 500, 501, 502, 503, 505, 506, 507, 509, 512, 514, 516); MIL-STD-167	Cold tests in the range down to -40ºC Limited to 95% RH
Mechanical performance evaluation of vehicle safety	Braking systems	Dynamic performance; Potential for inadvertent release; Potential for partial engagement; Safety requirements appraisal		ADR 35/01; in-house method QDAL-INST-304
	Vehicle - Performance design	Centre of gravity; Deep fording capability; Gradient capability; Mass; Overturn angles; Turning diameter; Vehicle handling performance	Single and multiple compression load cells; Single and multiple suspension using tension load cells	in-house methods: QAEL-INST-09, 11, 27, 29, 30, 35, 40; QDAL-INST-303	Vehicle mass up to 50 tonne
Performance evaluation of engine systems - Physical testing	Engines	Fuel range	Not applicable	in-house method QAEL-INST-33
Performance evaluation of personnel protection equipment and general ballistic measurements	Body armour	Ballistic performance	Not applicable	HOSDB Body Armour Standards for UK Police (2007) Part 2; DEF (AUST) 10946 (April 2012); ADF Personal Armour Test Standard Part 1: Body Armour (P-BFS-Perforation and Back Face Signature and V50 Ballistic Limit, excluding FSP-Fragment Simulating Projectiles); NIJ 0101.04, June 2001, Rev A; NIJ 0101.06, July 2008 (excluding Section 5 covering Flexible Armour conditioning protocol)	Hard and soft body armour
		Effect of environmental exposure on body armour	Cold; Damp heat; Driving rain, mist, drip; Dry heat; Dust; Humidity; Immersion; Low air pressure; Sealing; Temperature	DEF-STAN 07-55 (Tests A3, A4, A5, A8, A9, A13, B1, B2, B4, B5, B6, B7, B8, B11, B12, B14, D2, D3, D4, D5, D6); DEF-STAN 00-35 (Tests CL1, CL4, CL5, CL6, CL7, CL14, CL21, CL25-turbulent dust test only, CL27, CL28, CL29, CL30, M3, M4, M5, M11, M12); MIL-STD-810 (Tests 500, 501, 502, 503, 506, 507, 512, 516); MIL-STD-167	Cold tests in the range down to -40ºC

The only data displayed is that deemed relevant and necessary for the clear description of the Activities and Services covered by the Scope of Accreditation (SoA).

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

The Product column may also describe an Item or Material.

The Limitations column may also describe the Range.

Benefits of being a NATA accredited organisation

NATA accredits organisations to perform testing and inspection activities for their products and services. This gives consumers the assurance they need to make safe, healthy and reliable choices. When you choose to become NATA accredited, you can be sure of a number of competitive advantages for your business.