Intertek AIS

Site

Adelaide Mechanical

Accreditation No.

13770

Site No.

17067

Date of Accreditation

01 Oct 2008

Address

150 - 152 Francis Road
Wingfield, SA 5013
Australia

intertek.com

Contact

Mr Hans Zuidland P: +61 (08) 83450400

Availability

Services available to external clients

Intertek AIS address map

Scope of Accreditation

Print scopes
Adelaide Mechanical

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of elastomers, plastics and composite products Pipe material and related products; Prepared test specimens Failure mode; Tensile properties Tensile tests with load stress and cross-head control ISO 13953
 in the range 1 kN to 600 kN
Failure mode Strip bend decohesion ISO 21751 in the range 1 kN to 600 kN
Failure mode; Peel decohesion Not applicable ISO 13954
 in the range 1 kN to 600 kN
Material performance evaluation of metal products Fixtures and components; Prepared metallic test specimens Proof load; Tensile properties Tensile tests with load stress and cross-head control

AS 1391, ASTM A370, ASTM E8, ISO 6892-1

1 kN to 600 kN with strain rate control

at ambient temperatures

Fixtures and components; Prepared metallic test specimens; Welded test specimens Hardness Rockwell

AS 1815, ASTM A370

 Rockwell scales B and C
Hardness Vickers AS 1817, AS 2205.6.1, ASTM E92, ISO 9015-1, ASME IX, ISO 6507-1, NACE MR075, ISO 15156-2, ISO 15156-3

in the range 9.8 N to 490 N

Hardness Brinell

AS 1816, ASTM A370

in the range 2.45 kN to 29.4 kN

Prepared metallic test specimens Bending properties Longitudinal bend; Longitudinal guided bend; Mandrel bend; Re-bend; Reverse bend; Simple bend; Transverse guided bend

ASTM E290

Flaring ductility; Flattening properties Flattening AS/NZS 1163 Section 9.2.2
In-house procedure CSP 526

Compression; Shear strength Transverse tensile

ASTM E9, ASTM E143

in the range 1 kN to 600 kN 

Prepared metallic test specimens; Welded test specimens Impact resistance Charpy - Assessment of fracture appearance; Charpy V-notch - Impact value

AS 1544.2, AS 1544.3, ASTM A370, ASTM E23, ISO 148-1, ISO9016, ASME IX, ASME B31.3, AWS D1.1

at -196°C and from -150°C to ambient

Threaded fasteners, bolts and nuts Proof load Tensile tests with load stress and cross-head control

AS 1559, AS 4291.1, ASTM A370

in the range 1 kN to 600 kN

Tensile properties Tensile tests with load stress and cross-head control

AS 4291.1, ASTM A370

in the range 1 kN to 600 kN

Welded test specimens Nick-break fracture Visual examination

AS 2205.4.1, AS 3992 Clause 7.11, AWS D1.1Section 4, AWS D1.2 Section 3, AWS D1.6 Section 6

Bending properties Longitudinal bend; Longitudinal guided bend; Mandrel bend; Simple bend; Transverse guided bend

AS 2205.3.1, AS 2205.3.2, AS 2205.3.3, AS/NZS 3992, ASME IX, QW 160, QW466, ISO 5173, AWS D1.1 Section 4, AWS D1.2 Section 3, AWS D1.6 Section 6

Macroscopic examination Visual examination AS 2205.5.1, AS/NZS 3992, ASME IX, QW 183, QW 184, QW 462, ISO 17639, AWS D1.1 Section 4, AWS D1.2 Section 3, AWS D1.6 Section 6
Tensile properties All-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Uniaxial tension

AS 1391, ASTM A370, ASTM E8, ISO 6892-1, AS 2205.2.1, AS 2205.2.2, ISO 4136, ASME IX QW150 & QW 462, AWS D1.1 Section 4, AWS D1.2 Section 3, AWS D1.6 Section 6

in the range 0.5 kN to 600 kN at ambient temperatures

Fillet-break fracture Visual examination

AS 2205.4.2, AS/NZS 3992 Clause 7.10, ISO 9017, ASMEIX QW 182, AWS D1.1 Section 4, AWS D1.2 Section 3, AWS D1.6 Section 6

Wire, wire strands and coated wire products Tensile properties Tensile tests with control of strain rate, including yield stress and proof stress; Uniform elongation (Agt)

AS 1394, AS 2423, ASTM A370

ISO/IEC 17025 (2017)

Materials

Service Product Determinant Technique Procedure Limitations
Analysis of metals and alloys Aluminium and aluminium alloys; Copper and copper alloys; Stainless steels Comparative indication of material grade and alloy type Portable X-ray fluorescence equipment In-house procedure CSP 518 UNS No A96061, S31600, S32205, C63000, C90810
Metallic corrosion evaluation Austenitic, duplex and nickel-chromium alloys; Chemical corrosion treatment materials; Copper and copper alloys; Ferrous materials; Plating Coating thickness Dissolution - Strip, weigh and analytical; Gravimetric; High frequency eddy current; Magnetic induction - Low frequency; Microscopic examination

AS 2331.1.1, 

AS 2331.2.1

AS 2331.3.9


Austenitic, duplex and nickel-chromium alloys; Ferrous materials Corrosion rate; Intergranular corrosion resistance; Pitting corrosion resistance Ferric chloride pitting; Pit depth measurement; Weight differential measurement ASTM G48 Method A; ASTM A262 Method E
In-house procedure CSP 515
Metallographic evaluation of metals and alloys Austenitic, duplex and nickel-chromium alloys; Ferrous materials Ferrite count; Phase identification and proportion Optical microscopy; Physical measurement; Point count ASTM E562
In-house procedure CSP 518
Ferrous materials Macroscopic examination Macroscopic examination ASTM E3
Case depth and depth of decarburisation Hardness traverse; Macroscopic examination; Microhardness; Microscopic examination

AS 2003

Non-metallic inclusion content Microscopic examination ASTM E45
Depth of surface defects Microscopic examination; Visual examination In house procedure CSP 501 
Graphite type and distribution in cast irons Comparison method; Microscopic examination; Visual examination

AS 5049

Grain size Comparison method; Intercept (Heyn) method; Microscopic examination; Planimetric method; Point count; Visual examination

AS 1733, ASTM E112

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.