Safe Environments Pty Limited

Site

Asbestos, Hazardous Materials, Slip Resistance, Occupational Hygiene & Access Consulting National Inspectorate

Accreditation No.

17139

Site No.

18735

Date of Accreditation

12 Feb 2010

Address

6/7 Inglewood Place
Norwest, NSW 2153
Australia

safeenvironments.com.au

Contact

Mr Carl Strautins P: +61 (02) 96213706

Availability

Type A Inspection Body

Safe Environments Pty Limited address map

Scope of Accreditation

Print scopes
Asbestos, Hazardous Materials, Slip Resistance, Occupational Hygiene & Access Consulting National Inspectorate

ISO/IEC 17020 (2012)

Environment

Service Product Determinant Procedure Limitations
Assessment of occupational hazards Biological hazards; Chemical hazards; Fumes, gases and vapours; Inhalable and respirable fibres; Occupational noise and vibration exposures Evaluation of existing controls; Hazard identification; Location assessment; Management plans; Materials assessment; Re-inspection; Registers; Reports; Risk assessment; Site inspection; Specific-issue inspection; Survey; Workplace characterisation Covering standards, codes and specifications addressing the service, including:
AIOH Simplified Occupational Risk Management Strategies;
AIOH Simplified Monitoring Strategies,
AIOH Occupational Hygiene Monitoring and Compliance Strategies;
AIHA Exposure Assessment Strategies,
NIOSH and Australian Standards for workplace exposures,
Workplace exposure standards for Airborne Contaminants, considering client-driven risk matrices and using in-house documents,
EN 689
Respiratory protective equipment Fit factor; Fit testing Covering standards, codes and specifications addressing the service, including AS/NZS 1715 Selection, use and maintenance of respiratory protective equipment.
Potentially contaminated sites - Clearance inspection Asbestos dust; Asbestos materials; Buildings; Industrial plant; Marine vessels and offshore structures; Structures and adjoining land Assessment of clearance practices; Clearance inspection; Clearance to occupy; Reports

Covering standards, codes and specifications addressing the service, including:
Code of practice How to safely remove Asbestos limited to Section 3.10, 3.11, 5.2 and Appendix C,
Code of Practice for the Safe Removal of Asbestos [NOHSC: 2002 (2005)] limited to Part 11, in-house methods and supporting procedures
Potentially contaminated sites - Sample collection Asbestos dust; Asbestos materials; Buildings; Industrial plant; Lead dust; Lead in paint; Marine vessels and offshore structures; Soils; Structures and adjoining land; Surfaces Not applicable

Covering standards, codes and specifications addressing the service, including AS 4361.1 Appendix A and G and AS 4361.2 Appendix B and C, Guidelines for the assessment, remediation and management of asbestos-contaminated sites in WA (May 2009).
Potentially contaminated sites - Survey inspection Asbestos dust; Asbestos materials; Buildings; Industrial plant; Lead dust; Lead in paint; Marine vessels and offshore structures; Ozone depleting substances; Polychlorinated biphenyls; Soils; Structures and adjoining land; Synthetic mineral fibres Data presentation; Location assessment; Management plans; Materials assessment; Periodic inspection; Pre-demolition surveys; Re-inspection; Registers; Reports; Risk assessment; Site inspection; Standard bulk sampling survey; Survey; Visual survey

Covering standards, codes and specifications addressing the service, including:
Code of Practice How to manage and Control Asbestos in the Workplace.
Code of Practice for Management and Control of Asbestos in Workplaces, [NOHSC: 2018 (2005)].
UK Health & Safety Executive HSG 264 Asbestos: The Survey Guide, Appendix 4 Materials Assessment Algorithm.
UK Health & Safety Executive HSG 227: A Comprehensive guide to Managing Asbestos in premises Appendix 3 Priority Assessment Algorithm and in-house documents.
Guidelines for the assessment, remediation and management of asbestos-contaminated sites in WA (May 2009).
AS 4361.2 Appendix B and C.
National Standard for Synthetic Mineral Fibres [NOHSC: 1004 (1990)].
ANZECC Identification of PCB-containing capacitors and Inventory of Trade Names of Chemical Products Containing Ozone Depleting Substances and their Alternatives (UNEP DTIE).

ISO/IEC 17020 (2012)

Infrastructure and Asset Integrity

Service Product Determinant Procedure Limitations
Evaluation of elements supporting access and mobility requirements Other visual indicators; Tactile ground surface indicators (TGSI); Visual indicators on doorways, floors, ramps and stairs; Visual indicators on glazing Luminance; Luminance contrast; Luminous reflectance

Covering standards, codes and specifications addressing the service, including:
Codes AS 1428.1, AS/NZS 1428.4.1,
National Construction Code,
Disability Standards for Accessible Public Transport and Disability (Access to Premises – buildings) Standards.
Evaluation of pedestrian surfaces Carpets and mats; Pedestrian surfaces; Stairways Design verification Covering contractual requirements with acceptance criteria drawn from HB 197, HB 198, National Construction Code. Assessment of pedestrian surface plans and specifications for compliance
In situ inspection; Installation inspection; Lighting assessment; Location assessment; Management plans; Materials assessment; Periodic inspection; Registers; Reports; Risk assessment; Site inspection Covering contractual requirements with acceptance criteria drawn from HB 197, HB 198, National Construction Code. Assessment of new and used pedestrian surfaces including stairways for slip, trip and fall hazards.

The only data displayed is that deemed relevant and necessary for the clear description of the Activities and Services covered by the Scope of Accreditation (SoA).

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

The Product column may also describe an Item or Material.

The Limitations column may also describe the Range.