National Association of Testing Authorities, Australia
Scope of Accreditation
SAMI Bitumen Technologies Pty Limited
Site
Camellia Laboratory
Accreditation No.
5598
Site No.
5591
Date of Accreditation
31 May 1994
Contact
Availability
Services conditionally available to external clients
Scope of Accreditation
ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
| Service | Product | Determinant | Technique | Procedure | Limitations |
|---|---|---|---|---|---|
| Establishment of annex facilities | Materials defined by all or some for which the site is accredited | Determinations defined by all or some for which the site is accredited | Techniques defined by all or some for which the site is accredited |
Accreditation is held to establish annex facilities |
|
| Evaluation of geotechnical and civil construction material - Aggregate binder adhesion | Aggregates | Resistance to stripping | Immersion tray |
AS 1141.50 RMS (NSW) Method T230 TfNSW TS 02799.27 |
|
| Initial adhesion | Not applicable |
RMS (NSW) Method T238 TfNSW TS 02799.35 |
|||
| Evaluation of geotechnical and civil construction material - Aggregate properties | Aggregates | Shape | Average least dimension |
AS 1141.20.1 |
|
| Particle size distribution | Sieve analysis |
AS 1141.11.1, RMS (NSW) Method T201, WA 210.1 TfNSW TS 02799.02 |
|||
| Bulk density | Compacted |
AS 1141.4 |
|||
| Evaluation of geotechnical and civil construction material - Aggregate soundness | Aggregates | Soundness | Degradation factor on fine aggregate; Methylene blue value |
AS 1141.25.3, RMS (NSW) Method T659 TfNSW TS 02806.36 |
|
| Soundness | Sand equivalent |
AS 1289.3.7.1 |
|||
| Evaluation of geotechnical and civil construction material - Asphalt adhesion and stripping | Asphalts | Binder paste drain-off | Not applicable |
AustRoads Method AGPT/T235 |
|
| Evaluation of geotechnical and civil construction material - Asphalt extraction and grading | Asphalts | Bitumen content and aggregate grading | Ignition oven; Reflux |
AS/NZS 2891.3.1, Austroads Method AGPT/T234, RMS (NSW) Method T607 TfNSW TS 02806.08 |
|
| Evaluation of geotechnical and civil construction material - Asphalt filler | Asphalts | Voids in dry compacted filler | Not applicable | AS 1141.17 | |
| Evaluation of geotechnical and civil construction material - Asphalt mechanical properties | Asphalts | Marshall stability and flow | Not applicable |
AS/NZS 2891.5 |
|
| Evaluation of geotechnical and civil construction material - Asphalt performance | Asphalts | Deformation resistance | Wheel tracking machine |
AustRoads Method AGPT/T231 (2006) Austroads ATM 231 |
|
| Resilient modulus | Indirect tensile |
AS/NZS 2891.13.1 |
|||
| Fatigue life | Flexural bending |
AustRoads Method AGPT/T233 (2006), AustRoads Method AGPT/T274 (2006) Austroads ATM 274 |
|||
| Stripping potential | Tensile strength ratio |
AustRoads Method AGPT/T232 (2007) Austroads ATM 232RMS (NSW) Method T640 RMS (NSW) Method T649 TfNSW TS 02806.26,TfNSW TS 02806.31 |
|||
| Evaluation of geotechnical and civil construction material - Asphalt specimen manufacture | Asphalts | Specimen conditioning | Handling and conditioning |
AS/NZS 2891.2.1 RMS (NSW) Method T661 TfNSW TS 02806.38 |
|
| Specimen compaction | Gyratory compaction |
AS/NZS 2891.2.2 RMS (NSW) Method T662 TfNSW TS 02806.39 |
|||
| Specimen compaction | Compaction of asphalt slabs |
AustRoads Method AGPT/T220 |
|||
| Evaluation of geotechnical and civil construction material - Asphalt volumetric properties | Asphalts | Maximum density | Water displacement |
AS/NZS 2891.7.1 |
|
| Bulk density | Presaturation |
AS/NZS 2891.9.2 |
|||
| Bulk density | Mensuration |
AS/NZS 2891.9.3 |
|||
| Binder film index | Not applicable |
AustRoads Method AGPT/T237 |
|||
| Voids and density relationship | Not applicable |
AS/NZS 2891.8 |
ISO/IEC 17025 (2017)
Materials
| Service | Product | Determinant | Technique | Procedure | Limitations |
|---|---|---|---|---|---|
| Analysis of bituminous materials - Composition | Bituminous materials | Residue on evaporation | Not applicable |
AS/NZS 2341.23 |
|
| Recovery of residue | Not applicable |
AS 2341.30 |
|||
| Rubber content | Not applicable |
RMS (NSW) Method T737 TfNSW TS 02808.08 |
|||
| Water content | Water distillation |
AS 2341.9 |
|||
| Toluene insoluble matter | Not applicable |
AS/NZS 2341.8 |
|||
| Non-aqueous volatiles | Calculation by difference |
AS/NZS 2341.24 |
|||
| Analysis of bituminous materials - Properties | Bituminous materials | Viscosity | Rotational |
AS 2341.4 |
|
| Abrasion loss | Wet track abrasion |
ISSA TB 100 AustRoads Method AGPT/T272 |
|||
| Durability | Accelerated aging viscosity increase |
MRWA Method WA716.1 |
|||
| Sample handling and conditioning | Not applicable |
Austroads Method AGPT/T102 (2020) Austroads ATM 102RMS (NSW) Method T522 SAMI In-house method IT09B-21 TfNSW TS 02802.18 |
|||
| Torsional recovery | Not applicable |
Austroads Method AGPT/T122 (2006) Austroads ATM 122RMS (NSW) Method T739 TfNSW TS 02808.10 |
|||
| Durability | Long term exposure to heat and air |
AS/NZS 2341.10, ASTM D2872 |
|||
| Elastic recovery | Not applicable |
AustRoads Method AGPT/T121 |
|||
| Flash point | Not applicable |
AS 2341.14 AustRoads Method AGPT/T112 (2020) Austroads ATM 112 |
|||
| Viscosity | Dynamic - Capillary tube |
AS/NZS 2341.2 |
|||
| Particle charge | Not applicable |
AS/NZS 2341.22 |
|||
| Density | Density bottle |
AS 2341.7 |
|||
| Breaking behaviour | Setting time |
AS 2341.29 |
|||
| Softening point | Ring and ball |
AS 2341.18 Austroads Method AGPT/T131 RMS (NSW) Method T505 TfNSW TS 02802.04 |
|||
| Rolling thin film oven (RTFO) | Effect of heat and air on a moving film of bitumen |
AustRoads Method AGPT/T103 (2020) Austroads ATM 103 |
|||
| Segregation of bituminous materials | Not applicable |
Austroads Method AGPT/T108 RMS (NSW) Method T740 TfNSW TS 02808.11 |
|||
| Sieve residue | Sieve analysis |
AS/NZS 2341.20 |
|||
| Penetration of bitumen | Not applicable |
AS 2341.12 ASTM D5 SAMI In-house method IT09B-41 |
|||
| Consistency of slurry; Excess binder; Homogeneity of liquid pre-coats and adhesion agents | Loaded wheel |
RMS (NSW) Method T590 AustRoads Method AGPT/T270, AGPT/ T273 ISSA TB 106, 109, 114 TfNSW TS 02805.01 |
|||
| pH of bituminous emulsions | Classical |
AS 2341.32 |
|||
| Sedimentation | Not applicable |
AS 2341.27 |
|||
| Ease of remixing | Not applicable |
AustRoads Method AGPT/T109 |
|||
| Viscosity | Apparent |
ASTM D2493 |
|||
| Sample recovery | Rotary evaporator |
ASTM D5404 |
|||
| Ductility | Not applicable |
AS 2341.11 |
|||
| Permanent recovery and creep | Dynamic shear rheometer |
ASTM D7405 AASHTO T 350 |
|||
| Flow of rubber bitumen mixes | Flow performance |
RMS (NSW) Method T736 TfNSW TS 02808.07 |
|||
| Amine value of anti-stripping agent | Not applicable |
SAMI In-house method IT09B-71 |
|||
| Viscosity | Brookfield viscometer |
Austroads Method AGPT/T111 (2006) Austroads ATM 111 |
|||
| Stone coating ability and water resistance | Not applicable |
AS 2341.28 |
|||
| Joint filler resilience | Not applicable |
ASTM D5329 (Part 12 only) |
|||
| Compressive limit | Not applicable |
AustRoads Method AGPT/T132 (2006) Austroads ATM 132 |
|||
| Durability | Dynamic shear rheometer |
ASTM D7175 |
|||
| Set and cure of bituminous slurry | Cohesion |
AustRoads AGPT/T271 ISSA TB 139 |
|||
| Sieve residue | Sieve analysis |
AS 2341.26 |
|||
| Viscosity | Engler |
AS 2341.25 |
|||
| Sample collection | Bituminous materials | Not applicable | Bitumen emulsions from tanks, tankers and drums; Polymer modified bitumens from tanks, tankers and drums; Residual bitumens from tanks, tankers and drums |
AS 1160 Appendix A AS 2008 Appendix B (1997) Austroads Method AGPT/T101 (2006) Austroads ATM 101Austroads Method AGPT/ T221 |
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
Accreditation No.
5598
Site No.
5591
Print date
24 Apr 2024
