
National Association of Testing Authorities, Australia
Scope of Accreditation
Boral Resources (Country) Pty Limited
Scope of Accreditation
ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
Service | Product | Determinant | Technique | Procedure | Limitations |
---|---|---|---|---|---|
Establishment of annex facilities | Materials defined by all or some for which the site is accredited | Determinations defined by all or some for which the site is accredited | Techniques defined by all or some for which the site is accredited | ||
Evaluation of geotechnical and civil construction material - Aggregate contaminants | Aggregates | Weak particles contaminants | Sieve analysis |
AS 1141.32 |
|
Clay and fine silt | Settling |
AS 1141.33 |
|||
Organic impurities | Colour test |
AS 1141.34 |
|||
Evaluation of geotechnical and civil construction material - Aggregate properties | Aggregates | Particle density of coarse aggregate | Weighing-in-water |
AS 1141.6.1 |
|
Moisture content | Drying oven |
RMS (NSW) Method T262 |
|||
Shape | Average least dimension; Crushed faces; Flakiness; Proportional calliper |
AS 1141.14, AS 1141.15, AS 1141.20.1, AS 1141.20.2 RMS (NSW) Method T213, RMS (NSW) Method T235, RMS (NSW) Method T239, RMS (NSW) Method T275 |
|||
Water absorption of fine aggregate | Not applicable |
AS 1141.5 |
|||
Particle density of fine aggregate | Weighing-in-water |
AS 1141.5 |
|||
Particle size distribution | Fine particles in road materials; Sieve analysis; Sieve analysis of material finer than 75 µm |
AS 1141.11.1, AS 1141.12, AS 1141.19 RMS (NSW) Method T107;TfNSW T107;, RMS (NSW) Method T201, RMS (NSW) Method T203 |
|||
Bulk density | Compacted; Uncompacted |
AS 1141.4 |
|||
Water absorption of coarse aggregate | Not applicable |
AS 1141.6.1 |
|||
Evaluation of geotechnical and civil construction material - Aggregate strength | Aggregates | Wet/dry strength variation | Not applicable |
AS 1141.22 RMS (NSW) Method T215 |
|
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in-situ | Concrete, grout and mortar | Slump flow | Cone; T500 |
AS 1012.3.5 ASTM C1611 |
|
Compactibility index | Not applicable |
AS 1012.3.4 |
|||
Slump flow | Cone |
AS 1012.3.1 |
|||
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar properties | Concrete, grout and mortar | Mass per unit volume - Fresh concrete | In-situ measurement using fixed volume measure |
AS 1012.5 |
|
Indirect tensile strength | Brazil |
AS 1012.10 |
|||
Flexural strength | Modulus of rupture |
AS 1012.11 |
|||
Compressive strength | Core; Cube; Cylinder |
AS 1012.9, AS 1012.14 RMS (NSW) Method T375 |
|||
Mass per unit volume - Hardened concrete | Dimensions; Water displacement |
AS 1012.12.1, AS 1012.12.2 |
|||
Bleeding | In-situ analysis - Freshly mixed concrete |
AS 1012.6 |
|||
Air content of freshly mixed concrete | Reduced air pressure |
AS 1012.4.2 |
|||
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curing | Concrete, grout and mortar | Specimen conditioning; Specimen manufacture and curing | In-situ manufacture and curing of cylindrical specimens; In-situ manufacture and curing of drying shrinkage specimens; In-situ manufacture and curing of flexural strength specimens; In-situ manufacture and curing of grout and mortar cubes; Manufacture and curing of cylindrical specimens in the laboratory; Manufacture and curing of drying shrinkage specimens in the laboratory; Manufacture and curing of flexural strength specimens in the laboratory; Manufacture and curing of grout and mortar cubes in the laboratory; Wet conditioning of hardened concrete core specimens |
AS 1012.8.1, AS 1012.8.2, AS 1012.8.4 AS 1012.14RMS (NSW) Method T375 |
|
Specimen manufacture and curing | In-situ manufacture and curing of grout and mortar cubes; Manufacture and curing of grout and mortar cubes in the laboratory | AS 1012.8.3 | |||
Specimen manufacture | Mixing concrete in the laboratory |
AS 1012.2 |
|||
Evaluation of geotechnical and civil construction material - Soil classification | Soils | Liquid limit | Casagrande four point; Casagrande one point |
AS 1289.3.1.1, AS 1289.3.1.2 RMS (NSW) Method T108;TfNSW T108;TfNSW T105; |
|
Fine particles in road materials | Not applicable |
RMS (NSW) Method T107;TfNSW T107; |
|||
Linear shrinkage | Not applicable |
AS 1289.3.4.1 RMS (NSW) Method T113;TfNSW T113; |
|||
Moisture content | Drying oven |
AS 1289.2.1.1 RMS (NSW) Method T120 |
|||
Plasticity index | Casagrande |
AS 1289.3.3.1 RMS (NSW) Method T109;TfNSW T109;TfNSW T105; |
|||
Sieve analysis | Not applicable |
AS 1289.3.6.1 RMS (NSW) Method T106;TfNSW T106; |
|||
Plastic limit | Not applicable |
AS 1289.3.2.1 RMS (NSW) Method T109;TfNSW T109;TfNSW T105; |
|||
Evaluation of geotechnical and civil construction material - Soil pre-treatment | Soils | Soil pre-treatment | Accelerated weathering pre-treatment; Repeated compaction pre-treatment | RMS (NSW) Method T102;TfNSW T102;TfNSW T105;, RMS (NSW) Method T103;TfNSW T103;TfNSW T105; | |
Soil pre-treatment | Not applicable |
AS 1289.1.1 RMS (NSW) Method T105;TfNSW T105; |
|||
Sample collection | Aggregates | Not applicable | Aggregate from a stockpile |
AS 1141.3.1 |
|
Concrete, grout and mortar | Not applicable | Hardened concrete by coring | AS 1012.14 | ||
Not applicable | Fresh concrete from a mixer; Fresh concrete from deposited concrete; Fresh grout |
AS 1012.1 RMS (NSW) Method T375 |
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
Accreditation No.
3128
Site No.
3121
Print date
07 Jul 2022