Victorian Testing & Inspection Services Pty Ltd

Site

Gippsland Laboratory

Accreditation No.

18226

Site No.

18257

Date of Accreditation

17 Dec 2008

Address

35 Centre Road
Morwell, VIC 3840
Australia

victesting.com.au

Contact

Mr Andrew Joiner P: +61 (03) 51338220

Availability

Services available to external clients

Victorian Testing & Inspection Services Pty Ltd address map

Scope of Accreditation

Print scopes
Gippsland Laboratory

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of elastomers, plastics and composite products Pipe material and related products; Prepared test specimens Tensile properties Not applicable

ISO 13953

400 N to 1000 kN
Prepared test specimens Peel strength; Shear strength Not applicable

ISO 13954

400 N to 1000 kN
Bending properties; Visual examination Not applicable

BS EN 12814-1
Bending properties Strip bend decohesion ISO 21751
Material performance evaluation of metal products Fixtures and components Tensile properties Not applicable

AS 1391 and ASTM E8/E8M

400 N to 1 000 kN
Prepared metallic test specimens Hardness Vickers

AS 1817.1;
Charpy impact toughness Charpy - Assessment of fracture appearance; Charpy - Lateral expansion; Charpy V-notch - Impact value

ASTM E23; AS 1544.2

-101°C to 50°C and at -196°C 
Hardness Rockwell - Scale B; Rockwell - Scale C

AS 1815.1
Proof load; Tensile properties Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse tensile

AS 1391; AS 1855; ASTM E8/E8M;

400 N to 1000 kN
Hardness Brinell

AS 1816.1;

29.4 kN
Reinforcing bar and steel prestressing materials for concrete Bending properties Reverse bend; Simple bend AS/NZS 4671 Section 7.2.3
Shear strength of welded joints in mesh Direct shear force AS/NZS 4671 Section 7.2.5, ISO 15630-2 Section 7.1
Threaded fasteners, bolts and nuts Breaking load; Proof load; Tension Longitudinal tensile AS 4291.1
Tubing/piping Bending properties; Flattening properties; Reverse flattening; Shear strength Not applicable

AS 1074; AS 2505.3; AS 1163; ASTM A450;
Welded test specimens Fillet-break fracture; Fracture test; Nick-break fracture Macroscopic examination; Visual examination

AS 2205.4.1 (2003); 

AS 2205.4.2 (2003); 

AS/NZS 2205.4.1; 

API 1104; 

ASME IX QW182; 

AWS D1.1 Clause 6.23.4; 

ISO 9017; 

ISO 9606-1
Tension All-weld-metal tensile; Longitudinal tensile; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile

AS 2205.2.1

AS 2205.2.2
AS 2205.2.3

ASME IX QW150 

AWS D1.1 Clause 6.10.3.4

400 N to 1000 kN
Macroscopic examination; Visual examination Not applicable AS/NZS 2205.5.1 
ASME IX QW-183 
ASME IX QW-184
AWS D1.1 Clause 6.23.2
DNV-ST-F101Appendix B B.2.10
ISO 17639
Hardness Vickers

AS 2205.6.1; ASTM E384; ISO 6507.1
Charpy impact toughness Charpy - Assessment of fracture appearance; Charpy - Lateral expansion; Charpy V-notch - Impact value

AS 2205.7.1; AS 1544.2; ASTM E23; ASTM A370; ISO 148-1;
.

-101°C to 50°C and at -196°C
Bending properties Longitudinal guided bend; Re-bend; Reverse bend; Tongue bend; Transverse free bend; Transverse guided bend; Transverse joggle-butt wrap around bend

AS/NZS 2205.3.1;

AS 2205.3.2;

AS 2205.3.3;
AS 2205.3.4;
AS 2205.3.5;

ASME IX QW160;

AWS D1.1 Clause 6.10.3.1 & 6.10.3.2;

ISO 5173;

ISO 9606-1;
Material performance evaluation of metal products Prepared metallic test specimens Bending properties Longitudinal guided bend; Re-bend; Reverse bend; Transverse free bend; Transverse guided bend

AS/NZS 2205.3.1
Reinforcing bar and steel prestressing materials for concrete Tensile properties Longitudinal tensile

AS NZS 4671; ISO 15630-2;

400 N to 1000 kN

The only data displayed is that deemed relevant and necessary for the clear description of the Activities and Services covered by the Scope of Accreditation (SoA).

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

The Product column may also describe an Item or Material.

The Limitations column may also describe the Range.