
National Association of Testing Authorities, Australia
Scope of Accreditation
Ian Bennie and Associates Pty Ltd
Site
Ian Bennie and Associates Pty Ltd
Accreditation No.
2371
Site No.
2364
Date of Accreditation
01 Jun 2017
Contact
Availability
Services available to external clients
Scope of Accreditation
ISO/IEC 17025 (2017)
Manufactured Goods
Service | Product | Determinant | Technique | Procedure | Limitations |
---|---|---|---|---|---|
Evaluation of access protection products | Balustrades; Edge protection (including guardrails and guardrail posts) | Load; Rigidity; Strength | Not applicable | AS 1657, Appendix B | For compliance with design loads under AS/NZS 1170.1 and AS 1288 |
Barriers | Closing and latching performance; Durability; Rigidity; Strength | Not applicable | AS 1926.1 Appendices A, B, C, D, E and F | testing of swimming pool safety barriers to determine compliance with the requirements of AS 1926.1, Clauses 3.1 to 3.6 | |
Locksets for windows and doors | Durability; Keying security; Manipulation; Physical security - Strength | Not applicable | AS 4145.2 | ||
Mechanical performance evaluation of components for building envelopes, framing and interior lining | Door, window and skylight assemblies | Protection of openable windows by falls | Not applicable | AS 5203 | |
Air infiltration | Not applicable | ASTM E283/E283M | |||
Water penetration resistance | Cyclic pressure; Static pressure | ASTM E547-00; ASTM E331-00 | |||
Impact resistance | Not applicable | Design Guidelines for Queensland Public Cyclone Shelters, Section 3.2(b) – Debris Loads | Gust wind speed calculation per AS/NZS 1170.2 Section 3 | ||
Air infiltration; Deflection; Operating force; Strength; Water penetration resistance | Not applicable | AS 4420.1 | For compliance with AS 2074; Australian Glass and Window Association, A Guide to Window and Door Selection; SNZ TS 4211 | ||
Water penetration resistance | Not applicable | AAMA 501.2 | Product - metal curtain walls | ||
Deflection; Structural performance evaluation | Not applicable | ASTM E330/E330M | |||
Facade assemblies including interior and exterior cladding systems | Load | Not applicable | AS 4040.1 | For compliance with AS 1562.1, Section 5.4 – Resistance to Concentrated Loads | |
Air infiltration; Seismic evaluation; Strength at ultimate limit state loading; Water penetration resistance | Not applicable | AS/NZS 4284 | Including field testing; For compliance with NCC Volume One, Verification Method F3V1 – Weatherproofing of External Walls | ||
Impact resistance | Not applicable | AS/NZS 4040.5 | For compliance with AS 1562.3, Section 5.5 – Resistance to Impact (Sandbag) for Wall Cladding Boards | ||
Impact resistance | Not applicable | AS 4040.4-2006 | For compliance with AS 1562.3, Section 5.4 – Resistance to Impact (Sandbag) for Roofing Sheet Materials | ||
Pressure | Not applicable | AS 4040.2 | For compliance with AS 1562.1, Section 5.5 – Resistance to Wind Pressures for Non-Cyclone Regions | ||
Insulating glass units | Moisture penetration index | Not applicable | EN 1279-2 | ||
Safety glazing for building windows | Ageing; Exposure to temperature and humidity by boiling; Fragmentation; Impact resistance | Not applicable | AS 2208, Appendices H, F, E and D | ||
Skylights | Load | Not applicable | AS 4285, Section 2.2.2.2; AS 4040.1 | Determination of Resistance to concentrated loads for Rooflight Assemblies | |
Pressure | Not applicable | AS 4285, Section 2.2.2.3; AS 4040.2 | Determination of Resistance to Wind Pressures for Rooflight Assemblies in Non-Cyclonic Regions, as Specified in AS 4055 | ||
Pressure | Not applicable | AS 4285, Section 2.2.2.4; AS 4040.3 | Determination of Resistance to Wind Pressures for Rooflight Assemblies in Cyclonic Regions, as Specified in AS 4055 | ||
Water penetration resistance; Wind force resistance | Not applicable | AS 4285 Section 2.2.2.5; AS 4046.9 | Determination of dynamic weather Resistance for Rooflight Assemblies in Cyclonic Regions, as Specified in AS 4055 | ||
Performance evaluation of personnel protection equipment and general ballistic measurements | Road noise barriers; Road safety barrier systems | Impact resistance | Steel ball | MRTS15 Noise Fences (DTMR Queensland), Clause 6.6.3.1 – Impact Resistance |
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
Accreditation No.
2371
Site No.
2364
Print date
14 Jul 2025