National Association of Testing Authorities, Australia
Scope of Accreditation
AXS PTY LTD
Site
Mackay NDT and Hydro
Pipeline X-Ray Logistics
Accreditation No.
10826
Site No.
10819
Date of Accreditation
09 Oct 1995
Contact
Mr Peter Nelson P: +61 (07) 49525500
Availability
Services available to external clients
Scope of Accreditation
Mackay NDT and Hydro
ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
Service | Product | Determinant | Technique | Procedure | Limitations |
---|---|---|---|---|---|
Evaluation of mechanical performance of high pressure oil and gas pipelines | High pressure oil and gas pipelines | Leakage; Strength, leak and combined pressure evaluation | Not applicable | AS/NZS 2885.5 - Above ground and Underground piping | 100 kPa to 210 MPa |
Evaluation of mechanical performance of low pressure oil and gas pipelines | Low pressure oil and gas pipelines | Hydrostatic pressure | Not applicable | AS 2566.2 - Above ground and Underground piping AS 2885.5 - Above ground and Underground piping AS/NZS 2033 Section 7.2.3 AS/NZS 4645.2 Section 6.5 APIA Code of Practice Section 8.4.2 | 100 kPA to 210 MPa |
Evaluation of mechanical performance of pressure equipment | Hose and hose assemblies | Hydrostatic pressure | Not applicable | AS 2117, ISO 1402 clauses 8.1 and 8.4 | 100 kPa up to 210 MPa |
Piping | Hydrostatic pressure | Not applicable | AS 1228, AS 4037, AS 4041 ASME B31.1, ASME B31.3 | 100 kPA to 210MPa | |
Pressure vessels | Hydrostatic pressure | Not applicable | AS 1210, AS 3788, AS 4037 ASME VIII (Division 1) | 100 kPa up to 210 MPa | |
Valves | Hydrostatic pressure; Set pressure | Not applicable | AS 1271 | 100 kPa to 210 MPa | |
Evaluation of mechanical performance of water and sewer pipelines | Water pipelines | Hydrostatic pressure; Leakage | Not applicable | AS/NZS 2566.2 - Above ground and Underground piping AS/NZS 2033 Section 7.2.3 APIA Code of Practice Section 8.4.2 | 100 kPa to 210 MPa |
Non-destructive testing (NDT) - Magnetic particle testing | Metallic surfaces - Magnetic | Defect detection and characterisation | AC magnetic flow | AC magnetic flow (excluding AXS procedure TP 304 for testing over paint) | |
Non-destructive testing (NDT) - Penetrant testing | Metallic surfaces; Non-metallic surfaces | Defect detection and characterisation | Solvent removable; Water washable | ||
Non-destructive testing (NDT) - Radiographic testing | Metallic piping; Metallic plate | Product geometry | Film radiography | ||
Rolled or wrought aluminium products; Rolled or wrought steel products; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials; Welded joints - Titanium and titanium alloys | Defect detection and characterisation | Film radiography | |||
Non-destructive testing (NDT) - Radiographic testing - Specialised - Computed radiography | Rolled or wrought aluminium products; Rolled or wrought steel products; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials; Welded joints - Titanium and titanium alloys | Defect detection and characterisation | Not applicable | ||
Non-destructive testing (NDT) - Radiographic testing - Specialised - Digital radiography | Metallic piping; Metallic plate | Material profiling | Not applicable | ||
Rolled or wrought aluminium products; Rolled or wrought steel products; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials; Welded joints - Titanium and titanium alloys | Defect detection and characterisation | Not applicable | |||
Non-destructive testing (NDT) - Ultrasonic testing | Bonded metals | Defect detection and characterisation | A-scan - Manual | ||
Castings - Cast irons, steel and alloy steels | Defect detection and characterisation | A-scan - Manual | |||
Metallic piping; Metallic plate | Material thickness - Spot/grid only | Thickness meter | |||
Rolled or wrought steel products | Defect detection and characterisation | A-scan - Manual | |||
Welded joints - Ferritic materials | Defect detection and characterisation | A-scan - Manual | |||
Non-destructive testing (NDT) - Visual testing - Prior to initial service | Rolled products; Welded joints | Defect detection | Visual testing |
ISO/IEC 17025 (2017)
Manufactured Goods
Service | Product | Determinant | Technique | Procedure | Limitations |
---|---|---|---|---|---|
Material performance evaluation of metal products | Welded test specimens | Macroscopic examination | Visual examination | AS/NZS 2205.5.1 |
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
Accreditation No.
10826
Site No.
10819
Print date
07 Dec 2024
END OF SCOPE