ATTAR (Engineering Materials Evaluation Pty Ltd)

Site

Mechanical Testing – (Engineering Materials Evaluation Pty Ltd)

Accreditation No.

2735

Site No.

2728

Date of Accreditation

25 Sep 1989

Address

44-48 Rocco Drive
Scoresby, VIC 3179
Australia

attar.com.au

Contact

Dr Adrian Grosvenor P: +61 (03) 95746144

Availability

Services available to external clients

Scope of Accreditation

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
Dimensional metrology - Engineering equipment and precision instruments Surface friction testers Surface friction Direct measurement and by comparison with reference material By methods of BS 7976-3

Capability

with Calibration and Measurement Capability of

3 British pendulum value units in the range 1 to 150 pendulum value units

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of mechanical performance of pedestrian and impact attenuation surfaces Pedestrian surfaces Slip resistance Accelerated wear test; Dry floor friction tester; Oil-wet inclining platform; Wet pendulum; Wet-barefoot inclining platform

AS/NZS 3661.1: 1993 Appendix A

AS/NZS 4586:2004 and AS 4586 Appendix A

AS/NZS 4663:2004 and AS 4663 Appendix A 

AS/NZS 4586:2004 and AS 4586 Appendix D

AS/NZS 4586:2004 and AS 4586 Appendix B

AS/NZS 4663:2004 and AS 4663 Appendix B

AS/NZS 4586:2004 and AS 4586 Appendix C

ATTAR In-house Method No ETP023

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure
Material performance evaluation of metal products Fixtures and components Tensile properties Not applicable

ATTAR in-house standard EQP018

Prepared metallic test specimens Compression; Shear strength Not applicable

ATTAR in-house standard EQP019

Hardness Rockwell

AS 1815.1

Bending properties Longitudinal guided bend; Re-bend; Reverse bend; Transverse free bend; Transverse guided bend

AS 2505.1, AS 2505.2

Hardness Brinell

AS 1816.1

Hardness Vickers

AS 1817.1

Prepared metallic test specimens; Welded test specimens Tensile properties All-weld-metal tensile; Axial tensile; Longitudinal tensile; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Uniaxial tension

AS1391, AS2205.2.1, AS2205.2.2, AS2205.2.3

Reinforcing bar and steel prestressing materials for concrete Tensile properties Longitudinal tensile

AS/NZS 4671

Welded test specimens Bending properties Longitudinal guided bend; Transverse free bend; Transverse guided bend

AS 2205.3.1 AS 2205.3.2 AS 2205.3.3

Fillet-break fracture; Nick-break fracture Macroscopic examination; Visual examination

AS 2205.4.1, AS 2205.4.2

Hardness Brinell

AS 1816.1

Macroscopic examination Macroscopic examination

AS 2205.5.1, AS/NZS 1554.1 Section 4.7.4, AS/NZS 1554.5 Section 4.7.4

Hardness Vickers

AS 1817.1; AS/NZS 1554.1 Sections 4.7.8 and 4.7.9, AS/NZS 1554.5 Sections 4.7.8 and 4.7.9, AS 2205.6.1

Shear strength Longitudinal tensile; Transverse tensile

AS 2205.8.1, AS 2205.8.2

Hardness Rockwell

AS 1815.1

Performance evaluation of healthcare equipment and related items Building elements; Tactile ground surface indicators (TGSI); Visual indicators on doorways, floors, ramps and stairs Dimensions; Luminance contrast; Luminous reflectance Not applicable AS 1428.1 Appendix B,
AS/NZS 1428.4.1 clause 2.3.2 and Appendix E

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.