Golder Associates Pty Ltd

Site

Melbourne Laboratory

Accreditation No.

1910

Site No.

1903

Date of Accreditation

27 Feb 1985

Address

Building 7, Botanicca Corporate Park, 570-588 Swan Street
Richmond, VIC 3121
Australia

golder.com

Contact

Mr Mark Tulau P: +61 (03) 88623655

Availability

Services available to external clients

Scope of Accreditation

Melbourne Laboratory

ISO/IEC 17025 (2017)

Environment

Service Product Determinant Technique Procedure
Analysis for elements Emissions - Industrial Fluorine Ion selective electrode (ISE)

NSW EPA TM-9, SA EPA 03.03 

Analysis for industrial chemicals Air - Ambient Fluoride; Fluoride - Gaseous Continuous monitoring analyser

AS/NZS 3580.10.1 

Analysis for organic vapours Air - Indoor; Sorbent tubes; Vapours Volume measurement Absorption tube

in-house method OH/A11 

Vapours Volume measurement Absorption tube

AS 2986.1; AS2986.2 

(sampling only)

Analysis for physical and chemical characteristics Air - Ambient Particulate matter Directional dust gauge AS/NZS 3580.10.2
Particulate matter - PM10 Gravimetric

in-house method P8

Particulate matter - PM10; Particulate matter - PM2.5; Suspended particulate matter - Total High volume gravimetric

in-house method H3

Suspended particulate matter - Total High volume gravimetric

AS/NZS 3580.9.3

Particulate matter - PM10 Tapered element oscillating microbalance (TEOM)

AS 3580.9.8 

Particulate matter - PM2.5 Tapered element oscillating microbalance (TEOM) AS/NZS 3580.9.13 
Carbon dioxide (CO2); Carbon monoxide; Nitrogen - Oxidised; Oxygen; Sulfur dioxide Continuous monitoring analyser

In-house method C6

Carbon monoxide Direct reading instrument

AS 3580.7.1, AS2365.2 

Nitrogen - Oxidised Chemiluminescence

AS3580.5.1, AS2365.1.1, AS2365.1.2

Humidity; Temperature Hygrometer

in-house method M9

Particulate matter - PM2.5 Gravimetric

in-house method P10

Suspended particulate matter - PM10 Beta attenuation monitors

AS/NZS 3580.9.11

Particulate matter - PM2.5 Gravimetric AS/NZS 3580.9.14
Particulate matter - PM10; Particulate matter - PM2.5; Suspended particulate matter - Total Low volume gravimetric

in-house method L2

Particulate matter - PM10 Tapered element oscillating microbalance (TEOM) AS/NZS 3580.9.16 
Suspended particulate matter - PM10 Low volume gravimetric

AS 3580.9.9

Suspended particulate matter - PM10 High volume gravimetric

AS/NZS 3580.9.6 

Sulfur dioxide Direct reading instrument

AS 3580.4.1

Suspended particulate matter - PM2.5 Beta attenuation monitors

AS 3580.9.10, L2

Ash; Combustible matter; Solids - Insoluble; Solids - Total; Suspended particulate matter - PM2.5 Gravimetric

AS/NZS 3580.10.1

in-house method D3

Carbon dioxide (CO2); Oxygen Gas analyser

in-house method C6, O1

Particulate matter - PM10; Particulate matter - PM2.5 Gravimetric

in-house method P12 

Suspended particulate matter - PM2.5 Low volume gravimetric

AS 3580.9.10, L2

Emissions - Industrial Ozone Autoanalyser (AA)

In-house method O5

Particulate matter - PM10; Particulate matter - PM2.5 Tapered element oscillating microbalance (TEOM)

in-house method P14

Particulate matter - Total Gravimetric

SA EPA 03.01 and in-house method P1

Solids - Total Gravimetric

NSW EPA TM-15

Coarse particulates: PM2.5 - PM10 Gravimetric

NSW EPA OM-9

Stack gas concentration Gas analyser

SA EPA 03.14

Particulate matter Gravimetric

ISO 9096, USEPA Method 5, 17 and in-house method P1, L2

Particulate matter - PM10; Particulate matter - PM2.5 Gravimetric

USEPA 201A 

Emissions - Industrial; Emissions - Stack Moisture Gravimetric

NSW EPA TM-22, SA EPA 03.13, USEPA Method 4 and in-house method M5

Flow rate; Pressure; Velocity Pitot NSW EPA TM-2
Odour Dynamic olfactometry

AS/NZS 4323.3, NSW EPA OM-7,  SA EPA 03.15, SA EPA 03.16 and in-house method O4

Temperature Thermocouple

in-house method T6

Emissions - Stack Carbon dioxide (CO2); Carbon monoxide; Nitrogen - Oxidised; Oxygen; Sulfur dioxide Gas analyser

In-house method C6, USEPA Method 10

Sulfur - Total reduced Gas analyser USEPA  Method 16A and in-house method T5
Sulfuric acid as SO3; Sulfuric acid mist Gravimetric

in-house method S1

Carbon monoxide Gas analyser

NSW EPA TM-32, USEPA Method 10 and SA EPA 03.12, 03.14

Oxygen Gas analyser

NSW EPA TM-25

Carbon dioxide (CO2) Gas analyser

NSW EPA TM-24

Fluoride Ion selective electrode (ISE)

in-house method F1

Dry gas density; Molecular weight Gas analyser

NSW EPA TM-23, in-house method M8

Carbon dioxide (CO2); Oxygen Gas analyser

USEPA Method 3, USEPA Method 3A, in-house method C6, O1

Fluoride - Total Ion selective electrode (ISE)

USEPA Method 13B

Sulfur dioxide Gas analyser; Gravimetric

NSW EPA TM-4, USEPA Methods 6, 8 and in-house method S1, S2

Analysis for respirable crystalline silica (RCS) Air - Indoor Volume measurement; α-Quartz Gravimetric in-house method OH/A8 and National Occupational Health and Safety Commission Guidance Note on the Membrane Filter Method for Estimating Airborne Asbestos Fibres NOHSC:3003 (Sampling only)
Analysis of dust Dust Dust - Inhalable Gravimetric

AS 3640 

Dust - Respirable Gravimetric

AS 2985 

Analysis of the workplace environment and hazards for inorganic gases Air - Indoor Ammonia; Chlorine Classical

OH/A6, OH/C7, OH/C2

Counting of asbestos, mineral fibres (including synthetic) and organic fibres Air - Indoor Volume measurement Sampling flow rate and duration measurement National Occupational Health and Safety Commission Guidance Note on the Membrane Filter Method for Estimating Airborne Asbestos Fibres NOHSC:3003 and in-house method OH/A8
Meteorological monitoring Atmosphere Pressure; Radiation - Global; Rainfall; Rainfall - Calculated; Relative humidity (RH); Solar radiation; Temperature; Wind direction; Wind speed - Horizontal Barometer; Hygrometer; Pyranometer; Rainfall gauge; Temperature probe; Ultrasonic wind sensor

In-house method M9

Pressure; Radiation - Global; Rainfall; Rainfall - Calculated; Relative humidity (RH); Solar radiation; Temperature; Wind direction; Wind speed - Horizontal Barometer; Hygrometer; Pyranometer; Rainfall gauge; Temperature probe; Ultrasonic wind sensor

AS/NZS 3580.14 

Sample collection Air - Ambient Not applicable Adsorption tube in-house method A13
Not applicable High volume air sampler (HVAS)

in-house method S5 - Dioxins; furans;pesticides; polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) (as listed in the method) 

Not applicable Canisters

USEPA TO-14 - Volatile organic compounds 

USEPA TO-15 - Volatile organic compounds 

in-house method C9 - volatile organic compounds and reduced sulphur compounds

Not applicable Siting of air monitoring equipment

AS/NZS 3580.1.1

Not applicable Active sampling onto sorption tubes

USEPA TO-17 - Volatile organic compounds

in-house method A15-Aldehydes andketones 

in-house method V9 - VOCs 

Not applicable Passive diffusive

in-house method P13- for aldehydes; ammonia;BTEX; hydrochloric acid; hydrogen fluoride; hydrogen sulfide; nitrate; ozone;phenols; sulfur dioxide; volatile organic compounds

Not applicable Automated

USEPA TO-4A - pesticides and polychlorinated biphenyls

USEPA TO-9A - Polychlorinated, polybrominated, brominated/chlorinateddibenzo-p-dioxins, bibenzofurans

USEPATO-13A - Polycyclic aromatic hydrocarbons

Not applicable Gas analyser

USEPA TO-10A - Semi-volatile compounds

Air - Indoor Not applicable Filters; Sorbent tube

in-house method OH/A2 - Sampling for hydrogen fluoride,hydrochloric acid, hydrobromic acid, nitric acid, phosphoric acid, sulfuricacid

in-house method OH/E1 for metals

in-house method OH/I3 - Isocyantes (MDI, HDI, TDI)

in-house method OH/P3 - Plasticisers 

Not applicable Impinger AS2365.6 and in-house method P13
Emissions - Industrial Not applicable Filters; Impinger; Sorbent tube

CARB 429 - Determination of polycyclic aromatichydrocarbon (PAH) emissions from stationary sourcesNIOSH 2002 - Amines, aromatic
NIOSH 2010 - Aliphatic, amines
SA EPA 03.04 Chlorine
SA EPA 03.07 Metals
USEPA Method 23 - Dioxins and Furans
USEPA 26 Halides; halogens; hydrogen chloride
USEPA 26A Hydrogen halide; halogens by isokinetic
USEPA Method 29 - Metals

in-house methods
A2 - Ammonia
A14 - Atmospheric contaminants; odour (isolation flux chamber)
C1 - Chloride
C2 - Chlorine
C4 - Cyanides
C9 - Evacuated canisters for VOC and reduced sulfur compounds
G4 - Ammonia, chloride, chlorine, cyanide, fluoride, formaldehyde, hydrogensulphide, MDI, nitrogen oxides, TDI
H1 - Hydrogen sulphide
I1 - Isocyanates
I2 - Inorganic acids
M1 - MDI
M2 - Metals (acid extractable)
M4 - Mercaptans
N1 - Nitrogen oxides
P6 - Polychlorobenzenes (to be A13)
P7 - Phosphine
S4 - Semi-volatile organics
T1 - TDI (toluene diisocyanate)
TP 13 - Soil gas bore sampling for organic gases
V5 - Volatile principal organic hazardous constituents (POHCs) 

Sample collection - Stack and emissions sampling Emissions Oil mist Dilution/filter/condensation/adsorption - Isokinetic

in-house method O2, OH/O2

Emissions - Industrial Sampling points - Selection Isokinetic

SA EPA 03.09, USEPA Method 1 AS 4323.1, NSW EPA TM-1

Sampling - Area sources Flux chamber

AS/NZS 4323.4

Fluoride - Total Filters; Impinger USEPA Method 13B
Dry gas density; Molecular weight - Dry Continuous monitoring NSW EPA TM-23, in-house method M8
Sulfuric acid mist Impinger NSW EPA TM-3, SA EPA 03.02, USEPA Method 8, in-house method S1 and S2
Acidity Impinger SA EPA 03.11
Halogenated hydrocarbons Sorbent tube NIOSH 1003
Formaldehyde (methanal) Sorbent tube In-house method F5
Sampling position - Selection Impinger AS 4323.1, NSW EPA TM-1
Particulate matter - PM10; Particulate matter - PM2.5 Filter/impinger; Isokinetic USEPA 201A
2-Butoxyethanol; 2-Ethoxyethyl acetate (ethylene glycol monoethyl ether acetate, cellosolve acetate, EGMEA); 2-Methoxyethanol; 2-Methylpropan-2-ol (tert-butanol, tert-butyl alcohol); 4-Methyl-2-pentanone (methyl isobutyl ketone, MIBK); Acetone; Acrylonitrile; Aldehydes; Alkenes hydrocarbons; Allyl alcohol; Benzene; Butanone (methyl ethyl ketone, MEK, 2-butanone); Chlorinated hydrocarbons; Cyclohexanol; Cyclohexanone; Diacetone alcohol (2-pentanone, 4-hydroxy-4-methyl-2-pentanone); Dichloromethane (DCM, methylene chloride); Esters: C1-C10; Ethanol; Ethylbenzene; Hexane (n-hexane); Hydrocarbons: C1-C10; Isoamyl alcohol; Isobutyl alcohol (isobutanol, 2-methylpropan-1-ol); Isooctane; Isophorone (isoforone, isoacetophorone); Methanol; Methyl isobutyl carbinol (4-methylpentan-2-ol, MIBC); N-Methyl-2-pyrrolidone (NMP); Nonane (n-nonane); Pentane (n-pentane); Styrene (ethenyl benzene); Toluene; Vinyl chloride; Xylene; n-Butanol; sec-Butanol (sec-butylalcohol, 2-butanol) Impinger/sorbent tube

in-house method A13

Nitrogen oxide Impinger NSW EPA TM 11, USEPA Method 7C, 7E and SA EPA 03.06
Hydrogen sulfide Impinger NSW EPA TM-5 and SA EPA 03.05
Sulfur - Total reduced Impinger USEPA Method 16A and in-house method T5
Acid gases Dilution/filter/condensation/adsorption - Isokinetic

in-house method A11

Sulfur dioxide; Sulfur trioxide (sulfuric anhydride); Sulfuric acid mist Impinger NSW EPA TM-4, USEPA Methods 6, 8 and in-house method S1, S2
Fluorine Impinger NSW EPA TM-9, SA EPA 03.03
Sodium hydroxide Filters in-house method S3
Cresol; Phenols Impinger/sorbent tube

NIOSH 2546 

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.