Coffey Testing Pty Ltd

Site

Perth Laboratory

Accreditation No.

431

Site No.

14331

Date of Accreditation

23 Nov 1999

Address

269A Treasure Road
Welshpool, WA 6106
Australia

coffeytesting.com

Contact

Mr T Stevenson P: +61 (08) 64662400

Availability

Services available to external clients

Scope of Accreditation

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Establishment of annex facilities Materials defined by all or some for which the site is accredited Determinations defined by all or some for which the site is accredited Techniques defined by all or some for which the site is accredited
Evaluation of geotechnical and civil construction material - Aggregate abrasion Aggregates Abrasion resistance Los Angeles machine value AS 1141.23, MRWA Method WA220.1, MRWA Method WA220.2
Evaluation of geotechnical and civil construction material - Aggregate contaminants Aggregates Clay and fine silt; Weak particles contaminants Settling; Sieve analysis

AS 1141.32, AS 1141.33, RMS (NSW) Method T276

Evaluation of geotechnical and civil construction material - Aggregate properties Aggregates Shape Angularity; Average least dimension; Flakiness

AS 1141.15, AS 1141.16, AS 1141.20.1, AS 1141.20.2, MRWA Method WA215.1, MRWA Method WA216.1

Bulk density Compacted; Uncompacted

AS 1141.4

Particle density of coarse aggregate; Particle density of fine aggregate Weighing-in-water

AS 1141.5, AS 1141.6.1

Moisture content Drying oven; Microwave oven

MRWA Method WA212.1, MRWA Method WA212.2

Particle size distribution Sieve analysis; Sieve analysis of material finer than 75 µm

AS 1141.11.1, AS 1141.12, MRWA Method WA210.1

Evaluation of geotechnical and civil construction material - Aggregate strength Aggregates Aggregate crushing value; Wet/dry strength variation Not applicable AS 1141.21, AS 1141.22
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in-situ Concrete, grout and mortar Slump flow Cone

AS 1012.3.1

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar properties Concrete, grout and mortar Compressive strength Core; Cube; Cylinder

AS 1012.9, AS 1012.14

Mass per unit volume - Hardened concrete Dimensions

AS 1012.12.1

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curing Concrete, grout and mortar Specimen conditioning; Specimen manufacture and curing Curing cylinder specimens in the laboratory; Curing grout and mortar cube specimens in the laboratory; In-situ manufacture and curing of cylindrical specimens; In-situ manufacture and curing of flexural strength specimens; In-situ manufacture and curing of grout and mortar cubes; Manufacture and curing of cylindrical specimens in the laboratory; Manufacture and curing of flexural strength specimens in the laboratory; Manufacture and curing of grout and mortar cubes in the laboratory; Wet conditioning of hardened concrete core specimens

AS 1012.8.1, AS 1012.8.2, AS 1012.8.3, AS 1012.14, RMS (NSW) Method T304 

Evaluation of geotechnical and civil construction material - Road pavement surfacing characteristics Road pavements Layer thickness Not applicable

MRWA Method WA330.1

Evaluation of geotechnical and civil construction material - Rock properties Rocks Moisture content Drying oven

AS 4133.1.1.1

Compressive strength; Point load strength index Not applicable

AS 4133.4.1, AS 4133.4.2.1, AS 4133.4.2.2

Density; Porosity Not applicable

AS 4133.2.1.1, AS 4133.2.1.2

Evaluation of geotechnical and civil construction material - Soil chemical properties Soils Calcium carbonate content Not applicable MRWA Method WA915.1
Evaluation of geotechnical and civil construction material - Soil classification Soils Cone plasticity index; Linear shrinkage; Liquid limit; Moisture content; Particle density; Plastic limit; Plasticity index; Sieve analysis Casagrande four point; Casagrande one point; Cone four point; Cone one point; Drying oven; Microwave oven

AS 1289.2.1.1, AS 1289.3.1.1, AS 1289.3.1.2, AS 1289.3.2.1, AS 1289.3.3.1, AS 1289.3.3.2, AS 1289.3.4.1, AS 1289.3.5.1, AS 1289.3.6.1, AS 1289.3.9.1, AS 1289.3.9.2, MRWA Method WA110.1, MRWA Method WA110.2, MRWA Method WA115.1, MRWA Method WA115.2, MRWA Method WA120.1, MRWA Method WA120.2, MRWA Method WA121.1, MRWA Method WA122.1, MRWA Method WA123.1

Evaluation of geotechnical and civil construction material - Soil compaction characteristics Soils Assignment of optimum moisture content/maximum dry density (OMC/MDD); Dry density/moisture content relationship Modified compactive effort; Standard compactive effort

AS 1289.5.1.1, AS 1289.5.2.1, AS 1289.5.4.2, MRWA Method WA132.1, MRWA Method WA132.2, MRWA Method WA133.1, MRWA Method WA133.2

Evaluation of geotechnical and civil construction material - Soil dispersion Soils Dispersion Emerson class AS 1289.3.8.1
Evaluation of geotechnical and civil construction material - Soil field density Soils Compaction control; Density - In-situ; Dry density ratio; Moisture ratio Hilf; Nuclear gauge; Sand-cone; Statistical selection of reference values

AS 1289.5.3.1, AS 1289.5.4.1, AS 1289.5.4.3, AS 1289.5.7.1, AS 1289.5.8.1 MRWA Method WA134.1, MRWA Method WA136.1, MRWA Method WA324.1, MRWA Method WA324.2

Evaluation of geotechnical and civil construction material - Soil fine particles Soils Fine particle analysis Hydrometer AS 1289.3.6.3
Evaluation of geotechnical and civil construction material - Soil in-situ penetration Soils Penetration in-situ Dynamic cone; Perth sand penetrometer AS 1289.6.3.2, AS 1289.6.3.3
Evaluation of geotechnical and civil construction material - Soil in-situ strength Soils Impact strength - In-situ Clegg impact AS 1289.6.9.1
Evaluation of geotechnical and civil construction material - Soil laboratory bearing properties Soils Bearing ratio; Compressive strength Remoulded specimens; Uniaxial maximum dry AS 1289.6.1.1, MRWA Method WA140.1, MRWA Method WA141.1
Evaluation of geotechnical and civil construction material - Soil pre-treatment Soils Soil pre-treatment Not applicable

AS 1289.1.1, MRWA Method WA105.1

Sample collection Aggregates Not applicable Aggregate from a stockpile; Aggregate from a truck

AS 1141.3.1, MRWA Method WA200.1

Concrete, grout and mortar Not applicable Fresh concrete from a mixer; Hardened concrete by coring

AS 1012.1, AS 1012.14

Soils Not applicable Disturbed sampling from earthwork; Disturbed soil sampling from a face; Disturbed soil sampling from a pavement; Disturbed soil sampling from a stockpile; Disturbed soil sampling from a windrow; Disturbed soil sampling in-situ

AS 1289.1.2.1, MRWA Method WA100

Not applicable Site selection - Random sampling; Site selection - Random stratified sampling

AS 1289.1.4.1, AS 1289.1.4.2, MRWA Method WA0.1

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Annex facility Materials defined by all or some for which the site is accredited Determinations defined by all or some for which the site is accredited Techniques defined by all or some for which the site is accredited The Iron Bridge NPI Annex Facility # 2, Site No. 25410 is established from 17 November 2020 until 30 November 2021 for the Iron Bridge - Detailed Earthworks and Concrete Project for CPB Contractors. Contract No. W0134-S04.

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Annex facility Materials defined by all or some for which the site is accredited Determinations defined by all or some for which the site is accredited Techniques defined by all or some for which the site is accredited The Iron Bridge Annex Facility No #4, Site No. 25649, is acknowledged from 28 June 2021 until 30 November 2021 for the Iron Bridge Stage 1A Tails Storage facility and return Water Pond, for NRW Pty Ltd. Contract No. PU114475.

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Annex facility Materials defined by all or some for which the site is accredited Determinations defined by all or some for which the site is accredited Techniques defined by all or some for which the site is accredited The Robe Valley Annex Facility, Site No. 25188 is established from 16 March 2020 until 27 September 2021 for the Robe Valley sustaining Project - Miscellaneous Project for CPB, Contract No. W01027-011 Site Testing

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Annex facility Materials defined by all or some for which the site is accredited Determinations defined by all or some for which the site is accredited Techniques defined by all or some for which the site is accredited The Western Turner Annex Facility #2 is established from 1 April 2021 until 1 April 2022 for the Western Turner Syncline Phase 2 Stage 2 Project for  the Georgiou Group Pty Ltd. Contract No. 5157-COM-02232.

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Annex facility Materials defined by all or some for which the site is accredited Determinations defined by all or some for which the site is accredited Techniques defined by all or some for which the site is accredited The White Quartz Road Annex Facility, Site No. 25650 is acknowledged from 28 June 2021 until 28 March 2022 for the White Quartz Road Realignment (WQRR) Project - Stage 1 for Whiteens Pty Limited. Contract No. 20075-SUB-002.

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Annex facility Materials defined by all or some for which the site is accredited Determinations defined by all or some for which the site is accredited Techniques defined by all or some for which the site is accredited The Yanchep Rail Extension Annex Facility, Site No. 25415, is established from 16 November 2020 until 24 December 2023 for the Metronet-Yanchep Rail Extension Project for NEWest Alliance. Contract No. YRE-1011

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.