Philmac Pty Ltd

Site

Philmac Test Laboratory

Accreditation No.

14673

Site No.

14746

Date of Accreditation

22 Jul 2002

Address

53-59 Deeds Road
North Plympton, SA 5037
Australia

philmac.com.au

Contact

Ms Kate Frasca P: +61 0448103026

Availability

Services not available to external clients

Scope of Accreditation

Philmac Test Laboratory

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Products and appliances connected to the water supply - Physical evaluation Sanitary fixtures - Urinals, water closet pan/suites, bidets, douche seats, cisterns and purpose built bathroom modules Endurance Not applicable

AS 1172.2 Appendix F

Valves Endurance; Leak tightness; Leak tightness under external pressure; Resistance of the obdurator to differential pressure; Seat tightness; Torque Not applicable AS 5830.2 Appendices C, D, E, F, G, H For the purposes of determining compliance with AS 5830.2 clauses 4.1.2, 4.1.3, 4.1.4
Endurance; Resistance to internal pressure (hydrostatic strength); Shut off ability Not applicable AS 1910 (cold valves only) Appendices C, D, E  For the purposes of determining compliance to AS 1910 clauses 4.2, 4.3, 4.4
Hydrostatic pressure Not applicable ISO 5208
Hydrostatic pressure; Leak tightness Not applicable ISO 9393 Clauses 5 and 7
Endurance; Leak tightness; Leak tightness under external pressure; Leak tightness under vacuum; Resistance of the obdurator to differential pressure; Resistance to internal pressure (hydrostatic strength); Seat tightness; Shut off ability; Torque Not applicable

AS 1910 (cold water valves only) Appendices C, D, E for the purposes of determining compliance with clauses 4.2, 4.3, 4.4

AS 5830.2 Appendices C, D, E, F, G, H for the purposes of determining compliance with clauses 4.1.2, 4.1.3, 4.1.4 

ISO 5208

Float control valves for use in hot and cold water;
In-line ball valves
Water service products - Connectors, filters, fittings, hoses and pipes Hydrostatic pressure; Infiltration; Pressure cycling resistance; Pull-out resistance; Water tightness Not applicable AS/NZS 3707
ISO 1167
ISO 3459
ISO 3503, ISO 13845
ISO 3501
For the purposes of determining compliance with AS 5200.458 clauses 9.3.2, 9.3.3, 9.3.4, 9.3.5.1, 9.3.5.2, 9.3.6
Leak tightness under vacuum; Pull-out resistance; Verification of long term behaviour Not applicable ISO 1167-1, 1167-2, 1167-4
ISO 3458
ISO 3459
ISO 3501
ISO 3503
For the purposes of determining compliance with ISO 17885 clauses 8.2, 9.3.3.1, 9.3.3.2, 9.3.3.4, 9.3.3.7, 9.3.3.8
Leak tightness; Pull-out resistance; Resistance to internal pressure (hydrostatic strength); Verification of long term behaviour Not applicable ISO 17885 clause 8.2
ISO 1167
ISO 3458
ISO 3501
ISO 3503

For the purposes of determining compliance with AS/NZS 4129 clauses 1.12.1, 1.12.2, 2.4.2,.2.4.4, 2.4.4,.2.4.5
Bending properties; Hydrostatic pressure; Leak tightness under vacuum; Pull-out resistance Not applicable EN 712
EN 713
EN 921
EN 12294
For the purposes of determining compliance with AS/NZS 2537.3 clauses 4.2, 4.3, 4.4, 4.6, 4.7
Leak tightness under external pressure; Leak tightness under vacuum; Pressure; Pull-out resistance Not applicable DIN EN ISO 1167-1, 1167-3
ISO 3459
ISO 3501
ISO 3503

For the purposes of determining compliance with DIN 8076 Clauses 8, 9.2.1, 9.2.2, 9.2.3, 9.2.4
Bending properties; Hydrostatic pressure; Infiltration; Leak tightness; Pressure cycling resistance; Pull-out resistance; Resistance to internal pressure (hydrostatic strength); Resistance to sliding of a saddle on a pipe; Verification of long term behaviour; Water tightness Not applicable

AS 5200.458 clause 9.3.2, 9.3.3, 9.3.4, 9.3.5.1, 9.3.5.2, 9.3.6

AS/NZS 2537.3 clause 4.2, 4.3, 4.4, 4.6, 4.7

AS/NZS 3707

AS/NZS 4129 clauses 1.13.1, 1.13.2, 2.4.2, 2.4.3, 2.4.4, 2.4.5, 4.4.2, 4.4.3, 4.4.4, 4.4.5, 4.4.6

DIN 8076 clauses 8, 9.2.1, 9.2.2, 9.2.3, 9.2.4

EN 12294

ISO 1167.1, ISO 1167.2, ISO 1167.3, ISO 1167.4, ISO 3459, ISO 3501, ISO 3503, ISO 13845

ISO 17885 clauses 9.3.3.1, 9.3.3.2, 9.3.3.3, 9.3.3.4, 9.3.3.7, 9.3.3.8

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.