Port Hunter Environmental

Site

Port Hunter Environmental

Accreditation No.

21069

Site No.

25342

Date of Accreditation

07 Oct 2022

Address

5/11 McItosh Drive
Mayfield West, NSW 2304
Australia

phenviro.com.au

Contact

Mr Sharn Crosdale P: +61 (02) 49677880

Availability

Services available to external clients

Port Hunter Environmental address map

Scope of Accreditation

Print scopes
Port Hunter Environmental

ISO/IEC 17025 (2017)

Environment

Service Product Determinant Technique Procedure
Analysis for physical and chemical characteristics Emissions - Industrial; Emissions - Stack Moisture Gravimetric in-house method M201
Flow rate; Pressure; Temperature; Velocity; Volume Calculation; Pitot NSW EPA Test Method 2 and USEPA Method 2
Particulate matter - PM10; Particulate matter - PM2.5; Particulate matter - Total Gravimetric in-house method M106
Sample collection Air - Ambient Not applicable Dust gauge; High volume air sampler (HVAS) AS/NZS 3580.9.3, AS/NZS 3580.9.6, AS/NZS 3580.9.14 and AS/NZS 3580.10.1
Sample collection - Stack and emissions sampling Emissions - Industrial Hydrogen sulfide Impinger USEPA Method 11
Emissions - Stack Nitrogen - Oxides (NOx); Nitrogen dioxide; Nitrogen monoxide Continuous monitoring NSW EPA Test Method 11 and USEPA Method 7E
Cyanide Impinger USEPA Other Test Method 29
Odour Flux chamber AS/NZS 4323.3 and NSW EPA Other Approved Method 7
Dioxins; Furans XAD-2 resin NSW EPA Test Method 18 and USEPA Method 23
Cadmium; Mercury Impinger NSW EPA Test Method 14
Fluoride - Total Filter/impinger NSW EPA Test Method 9 and USEPA Method 13B
Moisture Impinger NSW EPA Test Method 22 and USEPA Method 4
Carbon monoxide Continuous monitoring NSW EPA Test Method 32 and USEPA Method 10
Formaldehyde (methanal) Impinger NIOSH Method 201 and USEPA SW-846 Test Method 0100
Beryllium; Chromium; Cobalt; Manganese; Nickel; Selenium; Tin; Vanadium Impinger NSW EPA Test Method 13
Antimony; Arsenic; Cadmium; Lead; Mercury Impinger NSW EPA Test Method 12
Polycyclic aromatic hydrocarbons (PAHs) XAD-2 resin California EPA Air Resources Board (CARB) Method 429 and NSW EPA Other Approved Method 6
Oxygen Continuous monitoring NSW EPA Test Method 25 and USEPA Method 3A
Antimony; Arsenic; Barium; Beryllium; Cadmium; Chromium; Cobalt; Copper; Lead; Manganese; Mercury; Nickel; Phosphorus; Selenium; Silver; Thallium; Zinc Filters; Impinger USEPA Method 29
Sulfur dioxide; Sulfuric acid mist Impinger NSW EPA Test Method 3 and USEPA Method 8
Carbon dioxide (CO2) Continuous monitoring NSW EPA Test Method 24 and  USEPA Method 3A
Bromine; Chlorine; Hydrogen halides Filter/impinger NSW EPA Test Method 8 and USEPA Method 26
Molecular weight - Dry Continuous monitoring NSW EPA Test Method 23 and USEPA Method 3
Chlorine Cyclone; Filters; Impinger NSW EPA Test Method 7 and USEPA Method 26A
Particulate matter Filters; Isokinetic AS 4323.2, NSW EPA Test Method 15 and USEPA Method 5
Ammonia Impinger USEPA Condition Test Method 027
Sulfur dioxide Continuous flow analyser (CFA) NSW EPA Test Method 4 and USEPA Method 6C
Volatile organic compounds (VOCs) Sorbent tube NSW EPA Test Method 34 and USEPA Method 18
Particulate matter - PM10; Particulate matter - PM2.5 Cyclone; Filters NSW EPA Other Approved Method 5, USEPA Method 201 and USEPA Method 201A
Sampling position - Selection Not applicable AS 4323.1, NSW EPA TM-1 and USEPA Method 1

The only data displayed is that deemed relevant and necessary for the clear description of the Activities and Services covered by the Scope of Accreditation (SoA).

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

The Product column may also describe an Item or Material.

The Limitations column may also describe the Range.