PROVE Standards & Engineering Pty Ltd

Site

PROVE Standards & Engineering Pty Ltd

Accreditation No.

18640

Site No.

20633

Date of Accreditation

02 Dec 2011

Address

3 Lever Street
Campbellfield, VIC 3061
Australia

proveng.com.au

Contact

Mr Frank Iapozzuto P: +61 (03) 93575626

Availability

Services available to external clients

Scope of Accreditation

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure
Material performance evaluation of paint and related products Industrial coatings Porosity Not applicable AS 3862 Appendix I
Hot water immersion Not applicable AS 3862 Appendix K
Appearance Not applicable AS 4158 Section 3.3.2.8
Continuity - Holiday High voltage (brush) AS 3894.1
Adhesion Knife test AS 1580.408.2
Thickness Measurement using a reference meter AS 3894.3
Pattern approval and physical performance evaluation of metering and trade measurement equipment Water meters Flow rate; Pressure loss; Reverse flow restrictor leakage appraisal; Torque resistance of threaded end connections; Water tightness Not applicable AS 3565.1 Sections 2.10, 2.11, 3.5.1, 3.5.2 and Appendices E, F
 NMI R49-2 Section 7.9
Products and appliances connected to the water supply - Physical evaluation Bain-maries; Beverage dispensers and icemakers; Combination washer/dryers; Dental equipment; Dishwashers; Disposal units - Sanitary napkin, placenta/surgical waste, disposable nappy; Evaporative air conditioners; Flushing valves for water closets and urinals; Hot water relief valves; Peelers - Fruit and vegetable; Photographic processors; Rainwater/mains supply changeover devices; Spraying apparatus/dispensing units - Hose connected; Steamers/humidifiers; Sterilisers and bedpan washers; Water heaters; Water treatment appliances and systems Strength of assembly Not applicable

WMTS-101 Section 9.3

WMTS-104 Section 9.3

WMTS-105 Section 9.3

Baths, sinks and basins Hydrostatic pressure; Load Not applicable WMTS-525  Sections 9.3.1, 9.3.2
Fire sprinkler heads Endurance; Hydraulic strength Not applicable WMTS 486 Sections 9.2, 9.3
Flushing valves for water closets and urinals Free passage evaluation; Water tightness Not applicable WMTS-106 Sections 9.1 and 9.2
EN 12050-2 Clause 8.4
EN 12050-3 Clause 8.4
Heat exchangers Hydraulic strength; Torque Not applicable WMTS-528 Sections 9.2, 9.3, 9.5 and Appendices B, C
Pressure compensating tanks Endurance; Hydraulic strength Not applicable WMTS-485 Sections 9.2, 9.3 and Appendices B, C
Sanitary fixtures - Urinals, water closet pan/suites, bidets, douche seats, cisterns and purpose built bathroom modules Back flow; Capacity; Chemical and stain resistance; Colour fastness to water of pigments; Contaminants; Degree of fineness (FWDU); Dimensions; Discharge; Distortion; Drainage; Endurance; Flexibility; Flow rate; Flush performance; Hydrostatic pressure; Impact resistance; Leakage; Load; Odour; Pull-out resistance; Resistance to stoppage; Splash; Strength of assembly; Thermal shock resistance; Thrust; Ultraviolet degradation resistance; Water tightness; Wetting Not applicable

ANSI Z124.9 Sections 7.5.1, 7.5.3

AS 1172.1 Sections 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8 and Appendices A, B, C, D, E, F, G, H

AS 1172.2 Sections 2.5.1, 2.5.2, 2.5.3, 2.5.4, 2.5.5, 2.5.6, 2.5.8, 6.4.1, 6.4.2, 6.4.3, 6.4.4 and Appendices B, C, D, E, F, G

AS 1172.3 Sections 4.3.1 and Appendix C
AS 1371 Appendices D, F

AS 1976 Section 5 and Appendices A, B, C

AS 2396:1980 Sections 6.1, 6.5, 6.6

AS 3558 Parts 2, 3, 5, 11, 12, 18

AS/NZS 3982 Section 1.6 and Appendices A, B, C, D

AS/NZS 4936 Section 7 and Appendices A, B, C, D

ENS TS055 Section 4.5

WMTS-051 Section 9.2 and Appendix B
WMTS-459 Section 9.2
WMTS-469 Section 9.4

WTMS-517 Sections 9.1, 9.2, 9.3, 9.4, 9.5

WMTS-520 Sections 9.2, 9.3, 9.4, 9.5
Showers and shower modules Endurance; Flow rate; Hydraulic strength; Hydrostatic pressure; Spray coverage; Spray force; Spread angle; Strength of assembly; Temperature evaluation Not applicable

AS/NZS 3662 Sections 5.1, 5.2, 5.3, 5.4, 5.5, 5.6 and Appendices B, C, D, E, F, G

AS/NZS 3662:2013 Clauses 5.4.1, 5.4.2 and Appendices H, I

WMTS-050 Section 9.2 and Appendix B

WMTS-525 Section 9.1
Spraying apparatus/dispensing units - Hose connected Back siphonage Not applicable WMTS-033 Section 9
Tap assemblies; Valves Bending properties; Closing temperature; Closing test - Flow rate; Closing test - Volume; Degradation; Dimensions; Endurance; Flow rate; Head loss; Impact resistance; Leak tightness; Load; Resistance to environmental agents; Seat tightness; Strength of assembly; Torque Not applicable

AS 1357.1 Sections 3.2.1, 3.2.2, 6.4.1, 6.4.2, 6.5 and Appendices E, F, P, Q, R

AS 1357.2 Sections 3.2.1, 3.2.2, 5.4, 5.5, 5.6, 5.7, 7.2, 7.4, 7.5, 8.4, 8.5, 9.4.1, 9.4.2, 9.4.3, 9.5 and Appendices , E, K, H, I, L, M, N, O, P, V, W

AS 1628 Sections 4.2, 4.3, 4.4, 4.5 and Appendices B, C, D

AS 1910 Sections 4.3, 4.4 and Appendices C, D, E

AS 4794 Section 5.1.4

AS 4795.1 Sections 5.2.1, 5.2.2, 5.2.3, 5.2.4, 5.2.5, 5.2.6

AS 4795.2 Sections 5.2.1, 5.2.2, 5.2.3, 5.2.4, 5.2.5, 5.2.6 and torque tests for compliance with clause 3.3.11

AS 4796 Sections 4.2, 4.4.1, 4.5, 4.6, 4.7, 4.8 and Appendices E, F, G, H, I

AS 5200.037.2 Sections 9.2, 9.3, 9.4.4 and Appendices B, C

AS 5830.1 Sections 4.1.2, 4.1.3, 4.1.4.1, 4.1.4.2, 4.1.4.3, 4.1.5 and Appendices C, D, E, F, H

AS 4032.1 Sections 3.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 4.10 and Appendices D, E, F, G, H, I, J

AS 4032.2 Sections 3.2, 3.3.1, 3.3.2, 3.4, 4.4, 4.6 and Appendices C, D, F, G, H

AS 4032.4 Sections 3.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.10, 4.11, 4.12, 4.13, 4.14, 4.15, 4.16 and Appendices C, D, E, F, G, H, I, J, K, L, M, N, O

AS 3498 Appendices A and B only, to assess the ability to prevent scalding and excluding Clause 7.2 

AS 5830.1 Section 4.1.4.4 and Appendix G

AS 6401 Sections 4.2.2, 4.2.3, 4.2.4, 4.2.5, 4.2.6

AS/NZS 2638.1 Sections 5.1.3, 5.1.4, 5.1.5, 5.1.6, 5.1.7, 5.1.11, 5.1.12

AS/NZS 2638.2 Sections 5.1.2, 5.1.3, 5.1.4, 5.1.5, 5.1.6, 5.1.7, 5.1.8, 5.1.11, 5.1.12, 5.1.14, 5.1.1

AS/NZS 2845.1 Sections 3.7.2, 3.7.4, 3.7.5, 7.4.2, 7.4.3, 7.4.4 and Appendices D, F, K, G, U, CC

AS/NZS 3718 Sections 4.2, 4.3, 4.4, 4.5, 4.6, 4.8, 4.9, 4.10, 4.11, 4.12, 4.13, 4.14, 4.15 and Appendices C, D, E, F, G, H, I, J, K, L, Q, M, N, R

ASSE 1072 Section 3.4

WMTS-006 Section 9.1

WMTS-012 Section 9.4.1

WMTS-030 Sections 9.3, 9.6 and Appendices D, E

WMTS-047 Sections 9.1, 9.2, 9.3, 9.4, 9.5, 9.6

WMTS-477 Sections 9.2, 9.3, 9.4, 9.5 and Appendices B, C, D

WMTS-479 Sections 9.3.1, 9.3.2 and Appendices B, C

WMTS-522 Sections 9.1, 9.3, 9.4, 9.5 (excluding Section 9.2), 9.6 b)

ISO 5208

ISO 9393-2

BS EN 200 Section 10

BS EN 817 Section 10

EN 274-2
Water hammer arresters Endurance; Hydraulic strength; Shock absorbing capacity Not applicable AS 5200.007 Sections 9.2, 9.3, 9.4 and Appendices B, C
ASSE 1010
Water heaters Hydraulic strength Not applicable AS 4552 Section 6.11.1
AS 60335.2.21 Section 22.47 and Annex A
Water service products - Connectors, filters, fittings, hoses and pipes Back siphonage; Bending properties; Crack propagation; Dimensions; Endurance; Fracture toughness; Impact resistance; Leak tightness; Load; Pressure; Pressure cycling resistance; Pull-out resistance; Reversion; Sample preparation and conditioning; Strength of assembly; Temperature evaluation; Thermal distortion; Torque Not applicable

AS 1432 Section 5.4 (excluding part 5.4.3)

AS 1589 Sections 1.13.2, 1.13.3, 2.6.1, 3.6.1, 4.9.1, 4.9.2, 4.9.3 and Appendices C, D, E, F, G, H

AS/NZS 2280 Clauses 4.1.2, 4.1.3, 4.2.2, 4.2.3, 4.2.4, 4.2.5 and Appendix F

AS 2845.2:1996 Appendix A

AS 2887 Sections 1.10.3, 2.6.1, 2.6.2, 2.6.3, 2.6.4, 2.6.5, 3.5.1, 3.5.2, 4.10.1, 4.10.2, 4.10.4, 4.10.3 and torque tests for compliance with Section 1.10.2

AS 2888 Parts 1, 2, 3, 4, 5, 6, 7, 8, 9, 10

AS 3688 Sections 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 4.10 and Appendices D, E, F, G, H, I, J, K, P (including dimensional verification of screw threads for determination of compliance to Section 3.8)

AS 4176.5 Sections 5.2, 5.3, 5.4, 5.5, 5.6, 5.7

AS/NZS 1254 Sections 3.2.1, 3.3.1, 3.3.2, 3.4.2

AS/NZS 1260 Sections 3.2.2, 3.3.1, 3.3.2, 3.3.4, 3.4.2, 3.4.3, 4.2, 4.3, 4.4, 5.2, 5.3, 5.4.1, 7.3

AS/NZS 1462 Parts 1, 3, 4, 6, 8, 11, 16, 17, 19, 24

AS/NZS 1477 Sections 3.3.1, 3.3.3, 3.3.4, 3.3.6, 3.4.1b, 3.4.2, 3.4.3, 3.4.4, 3.5.1, 3.5.2

AS/NZS 2492 Table 2.1 (Long term stability only), Table 3.3 (Hydrostatic strength only), Table 3.4 (Longitudinal reversion only)

AS/NZS 2537.3 Sections 4.2, 4.3, 4.4, 4.5, 4.6, 4.7

AS/NZS 2642.2 Section 10.3

AS/NZS 2642.3 Sections 12.2.1, 12.2.2, 12.2.3, 12.2.4, 12.2.5, 12.2.6, 12.2.7, 12.2.8 and Appendices C, D, E, F and torque tests for compliance with Section 11

AS/NZS 3499 Sections 8.2, 8.3, 8.4, 8.6, 8.7, 8.8, 8.9 and Appendices C, D4, D5, D7, D8, D9, D10

AS/NZS 3707

AS 3879 Sections 8.1, 8.2, 8.3, 8.4 and Appendices B, C, D, F

AS/NZS 4129 Sections 1.13.1, 1.13.2, 1.14.2, 2.4.2, 2.4.3, 2.4.4, 2.4.5, 4.4.2, 4.4.3, 4.4.4, 4.4.5, 4.4.6

AS/NZS 4130 Sections 10.1, 10.2

AS 4181 Sections 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7 and Appendices B, C, D

AS/NZS 4793 Sections 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6

AS/NZS 4998 Section 4.1.2, 4.1.3, 4.1.4

AS/NZS 5065 Section 3.2.1, 3.3.1, 3.3.2, 3.4.1, 3.4.2

EN 712

EN 713

EN 921

EN 12293

EN 12294

EN 12295

ISO 1167

ISO 2505

ISO 3459

ISO 3501

ISO 3503

WMTS-040 Sections 9.1, 9.2, 9.3, 9.4
WMTS-489 Sections 9.2, 9.3, 9.4 and Appendix B
Water treatment appliances and systems Burst pressure; Endurance; Hydrostatic pressure Not applicable

AS/NZS 3497 Sections 5.2, 5.3, 5.4

WMTS-103 Sections 9.2, 9.3, 9.4

WMTS-464 Sections 8.1, 8.2, 8.3, 9.2, 9.3, 9.4

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.