National Association of Testing Authorities, Australia
Scope of Accreditation
Boral Resources (SA) Pty Ltd
Site
Stonyfell Laboratory – Boral Testing Services
Accreditation No.
1003
Site No.
996
Date of Accreditation
08 Jun 1972
Contact
Availability
Services available to external clients
Scope of Accreditation
ISO/IEC 17025 (2017)
Environment
| Service | Product | Determinant | Technique | Procedure |
|---|---|---|---|---|
| Analysis for physical and chemical characteristics | Air - Ambient | Ash; Combustible matter; Deposited matter; Deposited matter - Insoluble; Deposited matter - Soluble | Gravimetric |
AS/NZS 3580.10.1 |
| Sample collection | Atmospheric dust fall | Not applicable | Deposit gauge |
AS/NZS 3580.10.1 |
ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
| Service | Product | Determinant | Technique | Procedure | Limitations |
|---|---|---|---|---|---|
| Evaluation of geotechnical and civil construction material - Aggregate abrasion | Aggregates | Abrasion resistance | Los Angeles machine value |
AS 1141.23 |
|
| Evaluation of geotechnical and civil construction material - Aggregate contaminants | Aggregates | Coarse aggregate quality | Visual comparison |
AS 1141.30.1; RC (Vic) Method 372.01 |
|
| Clay and fine silt | Settling |
AS 1141.33 |
|||
| Organic impurities | Colour test |
AS 1141.34 |
|||
| Weak particles contaminants | Sieve analysis |
AS 1141.32 |
|||
| Evaluation of geotechnical and civil construction material - Aggregate properties | Aggregates | Shape | Flakiness |
AS 1141.15; DPTI (SA) Method MAT-TP241 |
|
| Particle density of coarse aggregate | Weighing-in-water |
AS 1141.6.1 |
|||
| Shape | Crushed faces |
AS 1141.18 |
|||
| Shape | Flat particles |
DPTI (SA) Method MAT-TP244 |
|||
| Particle size distribution | Sieve analysis |
AS 1141.11.1 |
|||
| Particle density of fine aggregate | Weighing-in-water |
AS 1141.5 |
|||
| Bulk density | Compacted; Uncompacted |
AS 1141.4 |
|||
| Shape | Proportional calliper |
AS 1141.14 |
|||
| Shape | Elongation |
DPTI (SA) Method MAT-TP240 |
|||
| Shape | Average least dimension |
AS 1141.20.1, AS 1141.20.2 |
|||
| Particle size distribution | Sieve analysis of material finer than 75 µm |
AS 1141.12 |
|||
| Evaluation of geotechnical and civil construction material - Aggregate strength | Aggregates | Aggregate crushing value | Not applicable |
AS 1141.21 |
|
| Wet/dry strength variation | Not applicable |
AS 1141.22 |
|||
| Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in situ | Concrete, grout and mortar | Slump flow | Cone; J-ring; T500 |
AS 1012.3.1, AS 1012.3.5 |
|
| Evaluation of geotechnical and civil construction material - Concrete, grout and mortar permeability | Concrete, grout and mortar | Permeability | Volume change with water absorption - Permeable voids | AS 1012.21 | |
| Evaluation of geotechnical and civil construction material - Concrete, grout and mortar properties | Concrete, grout and mortar | Compressive strength | Core |
AS 1012.14 |
|
| Air content of freshly mixed concrete | Reduced air pressure |
AS 1012.4.2 |
|||
| Mass per unit volume - Fresh concrete | In situ measurement using fixed volume measure |
AS 1012.5 |
|||
| Compressive strength | Cylinder |
AS 1012.9 |
|||
| Mass per unit volume - Hardened concrete | Dimensions |
AS 1012.12.1 |
|||
| Indirect tensile strength | Brazil |
AS 1012.10 |
|||
| Evaluation of geotechnical and civil construction material - Concrete, grout and mortar shrinkage | Concrete, grout and mortar | Drying shrinkage specimen measurement | Not applicable |
AS 1012.13 |
|
| Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curing | Concrete, grout and mortar | Specimen manufacture and curing | In situ manufacture and curing of drying shrinkage specimens; Manufacture and curing of drying shrinkage specimens in the laboratory |
AS 1012.8.4 |
|
| Specimen manufacture and curing | In situ manufacture and curing of cylindrical specimens; Manufacture and curing of cylindrical specimens in the laboratory |
AS 1012.8.1 |
|||
| Specimen conditioning | Dry conditioning of hardened concrete core specimens; Wet conditioning of hardened concrete core specimens |
AS 1012.14 |
|||
| Specimen manufacture; Specimen manufacture and curing | Mixing concrete in the laboratory |
AS 1012.2 |
|||
| Specimen manufacture and curing | In situ manufacture and curing of flexural strength specimens; Manufacture and curing of flexural strength specimens in the laboratory |
AS 1012.8.2 |
|||
| Evaluation of geotechnical and civil construction material - Soil classification | Soils | Plasticity index | Casagrande |
AS 1289.3.3.1 |
|
| Sieve analysis | Not applicable |
AS 1289.3.6.1; DPTI (SA) Method MAT-TP134 |
|||
| Linear shrinkage |
AS 1289.3.4.1 |
||||
| Moisture content | Microwave oven |
AS 1289.2.1.4 |
|||
| Plastic limit | Not applicable |
AS 1289.3.2.1 |
|||
| Liquid limit | Casagrande one point |
AS 1289.3.1.2; DPTI (SA) Method MAT-TP143 |
|||
| Liquid limit | Casagrande four point |
AS 1289.3.1.1; DPTI (SA) Method MAT-TP141 |
|||
| Moisture content | Drying oven |
AS 1289.2.1.1 |
|||
| Evaluation of geotechnical and civil construction material - Soil pre-treatment | Soils | Soil pre-treatment | Not applicable |
AS 1289.1.1 |
|
| Sample collection | Aggregates | Not applicable | Aggregate from a conveyor belt; Aggregate from a stockpile; Aggregate from a truck |
AS 1141.3.1; DPTI (SA) Method MAT-TP226 |
|
| Concrete, grout and mortar | Not applicable | Hardened concrete by coring |
AS 1012.14 |
||
| Not applicable | Fresh concrete from a mixer |
AS 1012.1 |
The only data displayed is that deemed relevant and necessary for the clear description of the Activities and Services covered by the Scope of Accreditation (SoA).
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
The Product column may also describe an Item or Material.
The Limitations column may also describe the Range.
Accreditation No.
1003
Site No.
996
Print date
26 Aug 2026