Technical Calibrations Australia

Site

Tech Cals

Accreditation No.

20991

Site No.

25236

Date of Accreditation

04 Aug 2022

Address

18 Tapioca Street
Eight Mile Plains, QLD 4113
Australia

techcal.com.au

Contact

Mr Dhanushka Karunarathna P: +61 0411775346

Availability

Services available to external clients

Scope of Accreditation

Print scopes
Tech Cals

ISO/IEC 17025 (2017)

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise

Calibration

Service Product Determinant Technique Procedure Limitations
Force metrology - Force measuring and testing equipmentincluding on-site calibrations Compression and universal machines in compression; Hydraulic rams and jacks; Load cells Force in compression Comparison measurement with reference load cell AS 2193

Capability

including on-site calibrations (excludes load cells)
with Calibration and Measurement Capability of -
Compression
1.4% of the reading including 0.01 kN to 5 kN Class B requirements of AS 2193
0.76% of the reading including 5 kN to 50 kN Class A requirements of AS 2193
0.18% of the reading including 50 kN to 500 kN Class AA requirements of AS 2193
0.25% of the reading above 500 kN to 2000 kN Class A requirements of AS 2193
Mass - Determination of mass and calibration of weighing devicesincluding on-site calibrations Industrial weighing devices; Laboratory weighing devices; Precision laboratory balances Mass Gravimetric measurement against reference mass Monograph 4 The Calibration of Weights and Balances

Capability

including on-site calibrations
with Calibration and Measurement Capability of -
0.16 mg above 1 g up to and including 100 g
0.27 mg above 100 g up to and including 200 g
0.34 mg above 200 g up to and including 300 g
1.1 mg above 300 g up to and including  1kg
14 mg above 1kg up to and including 5 kg
0.06 g above 5 kg up to and including  20 kg
 0.13 g above 20 kg up to and including  32 kg
0.82 g above 32 kg up to and including 60 kg
Temperature metrology - Verification of controlled enclosuresincluding on-site calibrations Autoclaves and sterilising ovens; Baths; Freezers; Furnaces; Ovens Spatial uniformity Direct temperature measurement TM 04, TM 05

Capability

including on-site calibrations
with Calibration and Measurement Capability of
1.3 ºC from -100 ºC to 100 ºC
 2.1 ºC above 100 ºC to 200 ºC
(including  calibration of the installation sensor)

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.