WA Calibrations Pty Ltd

Site

WA Calibrations

Accreditation No.

20838

Site No.

25011

Date of Accreditation

10 May 2021

Address

7 Westonia Link
Baldivis, WA 6171
Australia

wacalibrations.com.au

Contact

Mr Wade Adam P: +61 0430672385

Availability

Services available to external clients

Scope of Accreditation

Print scopes
WA Calibrations

ISO/IEC 17025 (2017)

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise

Calibration

Service Product Determinant Technique Procedure Limitations
Mass - Determination of mass and calibration of weighing devices Laboratory weighing devices; Precision laboratory balances Mass Direct measurement

Capability

Including on-site calibrations
with calibration and measurement capability of -
1 in 106 or 10 µg (whichever is greater) up to 220 g
10 mg above 220 g to 4 kg
20 mg above 4 kg to 10 kg
100 mg above 10 kg to 20 kg
200 mg above 20 kg to 35 kg
Mass standards Mass Direct measurement

Capability

with calibration and measurement capability of –
10 µg from 1 mg to 1 g
15 µg above 1 g to 2 g
20 µg above 2 g to 5 g
25 µg above 5 g to 10 g
30 µg above 10 g to 20 g
50 µg above 20 g to 50 g
100 µg above 50 g to 100 g
200 µg above 100 g to 200 g
10 mg above 200 g to 2 kg
20 mg above 2 kg to 5 kg
50 mg above 5 kg to 10 kg
Temperature metrology - Ancillary temperature measuring equipment Digital voltmeters (DVM) and digital multimeters (DMM); Multi-channel thermocouple data recorders; Process calibrators Volt to temperature conversion Direct measurement by electrical input

Capability

Including on-site calibrations
with Calibration and Measurement Capability of -
0.2% of reading or 0.6 ºC (whichever is greater) in the range from -40 ºC to 1200 ºC (Type K thermocouple only)
Temperature metrology - Temperature measuring equipment Digital temperature measuring systems Temperature Comparison with a reference standard By in house method WAC CM01

Capability

Including on-site calibrations
with Calibration and Measurement Capability of -
0.5 °C in the range from -196 °C to below -40 °C
0.1 °C in the range from -40 °C to 150 °C
0.3 °C in the range above 150 °C to 250 °C
0.5 °C in the range above 250 °C to 650 °C
Temperature metrology - Temperature standards and reference equipment Dry block calibrators Temperature Direct measurement using a reference standard By in house method WAC CM05

Capability

Including on-site calibrations
with Calibration and Measurement Capability of -
0.2 °C in the range from -40 °C to 150 °C
0.3 °C in the range above 150 °C to 650 °C
Temperature metrology - Verification of controlled enclosures Baths; Freezers; Furnaces; Incubators; Ovens Temperature Direct temperature measurement IEC 60068-3-5 (excluding rate of change of cooling and heating tests)

Capability

Including on-site calibrations
with Calibration and Measurement Capability of -
1 °C in the range from -40 °C to 200 °C
8 °C in the range above 200 °C to 1200 °C
Medical refrigeration equipment Spatial uniformity; Temperature Direct temperature measurement AS 3864.2 (excluding clause 3.6.4)

Capability

Including on-site calibrations
with Calibration and Measurement Capability of
0.8 °C from -40 °C to below 0 °C
0.3 °C from 0 °C to 10 °C
Volume and density - Laboratory volumetric glassware and measures Piston operated volumetric apparatus (POVA) Volume Gravimetric

Capability

with calibration and measurement capability of –
0.02 µL from 0.25 µL to 2.5 µL
0.04 µL above 2.5 µL to 20 µL
0.3 µL above 20 µL to 200 µL
1.5 µL above 200 µL to 1000 µL
6 µL above 1000 µL to 5000 µL
11 µL above 5000 µL to 10000 µL

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.