Mobile Concreting Solutions Pty Ltd

Site

MCS Testing Laboratory

Accreditation No.

18231

Site No.

20042

Date of Accreditation

11 Feb 2011

Address

Lot 115, Bedrock Turn, Gap Ridge Light Industrial Area,
Karratha, WA 6714
Australia

mobileconcrete.com.au

Contact

Mr Marian Vrabel P: +61 (08) 91850400

Availability

Services available to external clients

Scope of Accreditation

Print scopes
MCS Testing Laboratory

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of geotechnical and civil construction material - Aggregate abrasion Aggregates Abrasion resistance Los Angeles machine value AS 1141.23,
MRWA Method WA 220.1
Evaluation of geotechnical and civil construction material - Aggregate contaminants Aggregates Weak particles contaminants Sieve analysis AS 1141.32
Clay and fine silt Settling

AS 1141.33
Organic impurities Colour test

AS 1141.34
Evaluation of geotechnical and civil construction material - Aggregate properties Aggregates Shape Flakiness

AS 1141.15,

MRWA Method WA 216.1
Bulk density Compacted; Uncompacted AS 1141.4
Particle size distribution Sieve analysis

AS 1141.11.1
Particle density of coarse aggregate; Water absorption of coarse aggregate Weighing-in-water AS 1141.6.1
Shape Average least dimension

AS 1141.20.1

AS 1141.20.2
Shape Proportional calliper

AS 1141.14
Particle size distribution Sieve analysis of material finer than 75 µm

AS 1141.12
Evaluation of geotechnical and civil construction material - Aggregate strength Aggregates Wet/dry strength variation Not applicable AS 1141.22
Aggregate crushing value Not applicable AS 1141.21
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in-situ Concrete, grout and mortar Slump flow Cone; J-ring; T500

AS 1012.3.1, AS 1012.3.5
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar properties Concrete, grout and mortar Mass per unit volume - Hardened concrete Dimensions

AS 1012.12.1
Indirect tensile strength Brazil AS 1012.10
Compressive strength Cube; Cylinder

AS 1012.9
Bleeding In-situ analysis - Freshly mixed concrete AS 1012.6
Air content of freshly mixed concrete Reduced air pressure

AS 1012.4.2
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curing Concrete, grout and mortar Specimen manufacture and curing Curing cylinder specimens in the laboratory; Curing grout and mortar cube specimens in the laboratory; In-situ manufacture and curing of cylindrical specimens; In-situ manufacture and curing of drying shrinkage specimens; In-situ manufacture and curing of grout and mortar cubes; Manufacture and curing of drying shrinkage specimens in the laboratory

AS 1012.8.1

AS 1012.8.3
AS 1012.8.4
Evaluation of geotechnical and civil construction material - Soil classification Soils Sieve analysis Not applicable MRWA Method WA115.1
Linear shrinkage Not applicable AS 1289.3.4.1, MRWA Method WA123.1
Moisture content Drying oven AS 1289.2.1.1, MRWA Method WA110.1
Plasticity index Casagrande; Cone AS 1289.3.3.1, MRWA Method WA122.1
Plastic limit Not applicable AS 1289.3.2.1, MRWA Method WA121.1
Liquid limit Casagrande four point; Casagrande one point; Cone four point AS 1289.3.1.1, AS 1289.3.1.2, AS 1289.3.9.1, MRWA Method WA120.2
Cone plasticity index Not applicable AS 1289.3.3.2, MRWA Method WA122.1
Sample collection Aggregates Not applicable Aggregate from a stockpile

AS 1141.3.1
Concrete, grout and mortar Not applicable Fresh concrete from a mixer; Fresh concrete from deposited concrete

AS 1012.1
Soils Not applicable Disturbed soil sampling from a stockpile MRWA Method WA100.1
Port Hedland Curing Site

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in-situ Concrete, grout and mortar Slump flow Cone

AS 1012.3.1
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curing Concrete, grout and mortar Specimen manufacture and curing Manufacture and curing of cylindrical specimens in the laboratory

AS 1012.8.1
Sample collection Concrete, grout and mortar Not applicable Fresh concrete from a mixer

AS 1012.1

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.