![NATA](https://nata.com.au/files/2021/02/nata.png)
National Association of Testing Authorities, Australia
Scope of Accreditation
Ektimo Pty Ltd
Site
Melbourne Laboratory
Accreditation No.
14601
Site No.
14659
Date of Accreditation
28 Aug 2001
Contact
Availability
Services available to external clients
Scope of Accreditation
ISO/IEC 17025 (2017)
Environment
Service | Product | Determinant | Technique | Procedure |
---|---|---|---|---|
Analysis for hydrocarbons | Emissions - Stack | Methylene diphenyl diisocyanate (MDI, isocyanate MDI, diphenylmethane diisocyanate); Toluene-2,4-diisocyanate (2,4-TDI); Toluene-2,6- diisocyanate (2,6-TDI) | HPLC | Ektimo 350 |
Volatile organic compounds (VOCs) - Total | Nondispersive infrared (NDIR) | USEPA method 25B | ||
1,1,1-Trichloroethane (1,1,1-TCA, methyl chloroform, chlorothene); 1,1-Dichloroethane (1,1-DCA); 1,1-Dichloroethene (1,1-DCE, vinylidene chloride); 1,2,3-Trimethylbenzene (1,2,3-TMB, hemimellitene); 1,2,4-Trimethylbenzene (1,2,4-TMB, pseudo-cumene); 1,2-Dichloroethane (1,2-DCA, ethylene dichloride); 1,3,5-Trimethylbenzene (1,3,5-TMB, mesitylene); 1,3-Diethylbenzene (m-diethylbenzene); 1,4-Diethylbenzene (p-diethylbenzene); 2,3-Dimethylpentane; 2-Ethoxyethyl acetate (ethylene glycol monoethyl ether acetate, cellosolve acetate, EGMEA); 2-Hexanone (MBK); 2-Methylhexane; 3-Methylhexane; 4-Methyl-2-pentanone (methyl isobutyl ketone, MIBK); Acetone; Benzene; Butanone (methyl ethyl ketone, MEK, 2-butanone); Butylbenzene; Butyraldehyde (butanal); Carbon tetrachloride (tetrachloromethane); Chlorobenzene (benzene chloride, monochlorobenzene); Cyclohexane; Decane (n-decane); Dichloromethane (DCM, methylene chloride); Dodecane (n-dodecane); Epichlorohydrin; Ethanol; Ethylacetate; Ethylbenzene; Heptane (n-heptane); Hexane (n-hexane); Isooctane; Isophorone (isoforone, isoacetophorone); Isopropylbenzene (cumene); Methylcyclohexane; Nonane (n-nonane); Octane (n-octane); Pentane (n-pentane); Propan-2-ol (isopropyl alcohol, isopropanol, 2-propanol); Styrene (ethenyl benzene); Tetrachloroethene (perchloroethylene, perchloroethene, tetrachloroethylene); Tetradecane (n-tetradecane); Toluene; Trichlorofluoromethane (freon-11, trichloromonofluoromethane); Trichloromethane (chloroform); Tridecane (n-tridecane); Undecane (n-undecane, hendecane, n-hendecane); Vinyl chloride; m-Xylene; n-Propylbenzene; o-Xylene; p-Xylene | GC-MS | USEPA SW846 method 8260 | ||
2,5-Dimethylbenzaldehyde; 2-Methylbenzaldehyde (o-tolualdehyde); 2-Methylpropanal (isobutyraldehyde); 3-Methylbenzaldehyde (m-tolualdehyde); 3-Methylbutanal (isovaleraldehyde); 4-Methylbenzaldehyde (p-tolualdehyde); Acetaldehyde (ethanal); Acrolein (2-propenal); Benzaldehyde (phenylmethanal); Butanone (methyl ethyl ketone, MEK, 2-butanone); Crotonaldehyde; Cyclohexanone; Decyl aldehyde (decanal); Formaldehyde (methanal); Heptanal; Hexanal (hexaldehyde); Nonanal; Octanal; Pentanal (valeraldehyde); Propionaldehyde (propanal); n-Butyraldehyde | HPLC | Ektimo 332 | ||
Combination of air impurities from two or more sources | Calculation | NSW EPA TM-38 | ||
Vinyl chloride | GC-FID | USEPA method 106 | ||
2,5-Dimethylbenzaldehyde; 2-Methylbenzaldehyde (o-tolualdehyde); 2-Methylpropanal (isobutyraldehyde); 3-Methylbenzaldehyde (m-tolualdehyde); 3-Methylbutanal (isovaleraldehyde); 4-Methylbenzaldehyde (p-tolualdehyde); Acetaldehyde (ethanal); Acetone; Acrolein (2-propenal); Benzaldehyde (phenylmethanal); Butanone (methyl ethyl ketone, MEK, 2-butanone); Crotonaldehyde; Formaldehyde (methanal); Hexanal (hexaldehyde); Pentanal (valeraldehyde); Propionaldehyde (propanal); n-Butyraldehyde | HPLC | Ektimo 330 | ||
Volatile organic compounds (VOCs) - Total | Flame ionisation detector (FID) | NSW EPA TM-20 | ||
1,3,5-Trimethylbenzene (1,3,5-TMB, mesitylene); 1-Butylene (1-butene); 2,5-Dimethylbenzaldehyde; 2-Ethoxyethanol (cellosolve); 2-Ethoxyethyl acetate (ethylene glycol monoethyl ether acetate, cellosolve acetate, EGMEA); 2-Methylbenzaldehyde (o-tolualdehyde); 3-Methylbenzaldehyde (m-tolualdehyde); 4-Methylbenzaldehyde (p-tolualdehyde); Acetaldehyde (ethanal); Acrylates and methacrylates: C1-C10; Acrylonitrile; Alcohols: C1-C10; Benzaldehyde (phenylmethanal); Benzene; Butanone (methyl ethyl ketone, MEK, 2-butanone); Crotonaldehyde; Cyclohexanone; Decyl aldehyde (decanal); Dichloromethane (DCM, methylene chloride); Diethyl ether; Dimethylether; Esters: C1-C10; Ethylbenzene; Ethyne (acetylene); Formaldehyde (methanal); Freons; Halogenated hydrocarbons; Heptanal; Hexanal (hexaldehyde); Hydrocarbons: C1-C10; Isobutene (iso-Butene); Mercaptans; Methylene diphenyl diisocyanate (MDI, isocyanate MDI, diphenylmethane diisocyanate); Monocyclic aromatic halogenated hydrocarbons; Monocyclic aromatic hydrocarbons; Naphthas; Nonanal; Octanal; Oxirane (ethyleneoxide); Pentanal (valeraldehyde); Polycyclic aromatic hydrocarbons (PAHs); Propylene (propene) oxide; Styrene (ethenyl benzene); Toluene; Toluene-2,6- diisocyanate (2,6-TDI); Trichlorofluoromethane (freon-11, trichloromonofluoromethane); Vinyl chloride; Volatile organic compounds (VOCs); Xylene; n-Butyraldehyde | GC-FID; GC-MS | Ektimo 344 | ||
Volatile organic compounds (VOCs) | GC-FID; GC-MS | NSW EPA TM-34; USEPA method18 | ||
1,3-Butadiene; 1-Butylene (1-butene); Butane (n-butane); Dimethylether; Ethane; Ethene (ethylene); Ethyne (acetylene); Isobutane; Isobutene (iso-Butene); Methane; Propane; Propene (propylene); Vinyl chloride; cis-2-Butene; trans-2-Butene | GC-FID | Ektimo 340 | ||
Passivated cannisters; Tedlar bags | 1,1,1-Trichloroethane (1,1,1-TCA, methyl chloroform, chlorothene); 1,1,2,2-Tetrachloroethane (acetylene tetrachloride); 1,1,2-Trichloro-1,2,2-trifluoroethane (freon 113' trichlorotrifluoroethane); 1,1,2-Trichloroethane (1,1,2-TCA, vinyl trichloride); 1,1-Dichloroacetone; 1,1-Dichloroethane (1,1-DCA); 1,1-Dichloroethene (1,1-DCE, vinylidene chloride); 1,1-Dichloroethylene; 1,2 Dibromoethane (ethylene dibromide, EDB); 1,2,4-Trichlorobenzene (1,2,4-TCB); 1,2,4-Trimethylbenzene (1,2,4-TMB, pseudo-cumene); 1,2-Dibromoethene; 1,2-Dichlorobenzene (o-dichlorobenzene); 1,2-Dichloroethane (1,2-DCA, ethylene dichloride); 1,2-Dichloropropane (propylene dichloride); 1,2-Dichlorotetrafluoroethane (freon-114); 1,3,5-Trimethylbenzene (1,3,5-TMB, mesitylene); 1,3-Butadiene; 1,3-Dichlorobenzene (m-dichlorobenzene); 1,4-Dichlorobenzene (p-dichlorobenzene); 1,4-Dioxane; 4-Ethyltoluene; 4-Methyl-2-pentanone (methyl isobutyl ketone, MIBK); Acetone; Acrolein (2-propenal); Benzene; Benzylchloride (chloromethylbenzene); Bromodichloromethane (dichlorobromomethane); Bromoform (tribromomethane); Bromomethane (methylbromide); Butanone (methyl ethyl ketone, MEK, 2-butanone); Carbon disulfide; Carbon tetrachloride (tetrachloromethane); Chlorobenzene (benzene chloride, monochlorobenzene); Chloroethane; Chloromethane; Cyclohexane; Dibromochloromethane (chlorodibromomethane); Dichlorodifluoromethane (freon-12); Dichloromethane (DCM, methylene chloride); Diethyl ether; Ethanol; Ethylacetate; Ethylbenzene; Heptane (n-heptane); Hexachloro-1,3-butadiene (hexachlorobutadiene, HCBD); Hexane (n-hexane); Methyl butyl ketone; Methyl tert-butyl ether (MTBE); Methylmethacrylate; Naphthalene; Propan-2-ol (isopropyl alcohol, isopropanol, 2-propanol); Propene (propylene); Propionaldehyde (propanal); Styrene (ethenyl benzene); Tetrachloroethene (perchloroethylene, perchloroethene, tetrachloroethylene); Tetrahydrofuran (THF); Toluene; Total organic compounds (as hexane equivalent); Trichloroethene (trichloroethylene, TCE); Trichlorofluoromethane (freon-11, trichloromonofluoromethane); Trichloromethane (chloroform); Vinyl acetate; Vinyl chloride; cis-1,2-Dichloroethylene; cis-1,3-Dichloropropene (cis-1,3-dichloropropylene); m-Xylene; o-Xylene; p-Xylene; trans-1,2-Dichloroethene (trans-1,2-DCE, trans-1,2-dichloroethylene); trans-1,3-Dichloropropene (trans-1,3-dichloropropylene) | GC-MS | Ektimo 345B | |
Methane; Propane | GC-FID; GC-TCD | Ektimo 346 | ||
Analysis for industrial chemicals | Emissions - Industrial | Glycols; Methanol; Oxirane (ethyleneoxide) | GC-FID | Ektimo 344 |
1,2-Diethylbenzene (o-diethylbenzene); 1-Methoxy-2-propanol (methoxypropanol, PGME); 1-Methoxy-2-propylacetate (PGMEA); 2-Butoxyethanol; 2-Butoxyethylacetate (EGBEA); 2-Ethoxyethyl acetate (ethylene glycol monoethyl ether acetate, cellosolve acetate, EGMEA); Acrylonitrile; Cyclohexanol; Cyclohexanone; D-limonene; Diacetone alcohol (2-pentanone, 4-hydroxy-4-methyl-2-pentanone); Fluorobenzene; Glycidyl methacrylate; Isobutyl alcohol (isobutanol, 2-methylpropan-1-ol); Isopropyl acetate (2-propyl acetate); n-Butanol; n-Butylacetate; n-Propylacetate; α-Methylstyrene; α-Pinene; β-Pinene | GC-MS | USEPA SW846 method 8260 | ||
Passivated cannisters; Tedlar bags | Carbonyl sulfide; Dimethylsulfide; Ethanethiol; Hydrogen sulfide; Methanethiol | GC-MS | Ektimo 345A | |
Argon; Carbon dioxide (CO2); Carbon monoxide; Hydrogen; Nitrogen; Oxygen | GC-FID; GC-TCD | Ektimo 346 | ||
Analysis for phenols | Emissions - Stack | 2-Methylphenol (2-cresol, o-cresol); 3-Methylphenol (3-cresol, m-cresol); 4-Methylphenol (4-cresol, p-cresol); Phenol; Resorcinol | HPLC | Ektimo 320 |
Analysis for physical and chemical characteristics | Air - Ambient | Deposited matter | Gravimetric | AS 3580.10.1 |
Suspended particulate matter - Total | Gravimetric | AS 3580.9.3 | ||
Particulate matter - PM2.5 | Beta attenuation monitors | AS 3580.9.12 | ||
Particulate matter - PM10 | Beta attenuation monitors | AS 3580.9.11 | ||
Nitrogen - Oxidised | Direct reading instrument | AS 3580.5.1 | ||
Carbon monoxide | Direct reading instrument | AS 3580.7.1 | ||
Ozone | Direct reading instrument | AS 3580.6.1 | ||
Data validation | Calculation | AS 3580.19 | ||
Sulfur dioxide | Direct reading instrument | AS 3580.4.1 | ||
Particulate matter - PM10 | Gravimetric | AS 3580.9.6 | ||
Emissions - Stack | Sulfur oxides; Sulfuric acid mist | Titration | SA EPA 03.02; USEPA method 8 | |
Sulfur - Total reduced | Calculation | USEPA Performance Specification 5 | ||
Flow rate; Pressure; Temperature; Velocity | Classical; Direct reading instrument | NSW EPA TM-2 | ||
Particulate matter - Total | Gravimetric | AS 4323.2; ISO 9096; NSW EPA TM-15; SA EPA 03.01; USEPA method 5; USEPA method 17; VDI 2066 | ||
Oxygen | Gas analyser | NSW EPA TM-25 | ||
Carbon dioxide (CO2); Oxygen | Gas analyser | USEPA method 3A | ||
Bromide; Chloride; Fluoride; Sulfate | Ion chromatography (IC) | Ektimo 235 | ||
Sulfur dioxide | Gas analyser | ISO 7935; NSW EPA TM-4; USEPA method 6C | ||
Nitrogen - Oxidised; Sulfur dioxide | Calculation | USEPA Performance Specification 2 | ||
Hydrogen sulfide | Calculation | USEPA Performance Specification 7 | ||
Fluoride - Acid soluble particulate; Fluoride - Gaseous | Ion selective electrode (ISE) | AS 3580.13.2 | ||
Carbon - Total organic (TOC) | Calculation | USEPA Performance Specification 8a | ||
Total gaseous organic concentration | Flame ionisation detector (FID) | USEPA method 25A | ||
Particulate matter - Condensable | Gravimetric | USEPA method 202 | ||
Odour | Olfactometry | AS 4323.3; NSW EPA OM-7 | ||
Hydrogen sulfide | Titration | USEPA method 11; VIC EPA B18 | ||
Carbon dioxide (CO2); Carbon monoxide; Oxygen | Gas analyser | ISO 12039 | ||
Nitrogen - Oxidised; Sulfur dioxide | Gas analyser | USEPA method 20 | ||
Coarse particles | Gravimetric | NSW EPA OM-9 | ||
Carbon dioxide (CO2); Oxygen | Calculation | USEPA Performance Specification 3 | ||
Sulfur - Total reduced | Gas analyser | USEPA method 16C | ||
Carbon dioxide (CO2); Carbon monoxide; Nitrogen - Oxidised; Oxygen; Sulfur dioxide | Gas analyser | SA EPA 03.14 | ||
Hydrogen sulfide | UV-vis spectrophotometry | Ektimo 255; NSW EPA TM-5 | ||
Flow rate; Velocity | Pitot | ISO 10780; SA EPA 03.10; USEPA method 2; AS 4323.1 | ||
Carbon monoxide; Nitrogen - Oxidised; Oxygen | Gas analyser | USEPA method OTM 13 | ||
Nitrogen dioxide; Nitrogen monoxide; Nitrogen oxide | Gas analyser | ISO 10849; NSW EPA TM-11 | ||
Water vapour (<100ºC) | Gravimetric | VIC EPA 3040 | ||
pH | Electrometric | Ektimo 170 | ||
Carbon dioxide (CO2); Molecular weight - Dry | Calculation; Infrared (IR) | SA EPA 03.08 | ||
Carbon monoxide | Gas analyser | NSW EPA TM-32; SA EPA 03.12; USEPA method 10 | ||
Fluoride | Ion selective electrode (ISE) | Ektimo 240; SA EPA 03.03 | ||
Molecular weight - Dry | Calculation | USEPA method 3; NSW EPA TM-23 | ||
Particulate matter - PM10; Particulate matter - PM2.5 | Gravimetric | USEPA method 201A; NSW EPA OM-5 | ||
Sulfur dioxide | Ion chromatography (IC) | ISO 11632 | ||
Particulate matter - PM10 | Gravimetric | Ektimo 121 | ||
Flow rate | Calculation | USEPA Performance Specification 6 | ||
Particulate matter | Calculation | USEPA Performance Specification 11 | ||
Moisture | Gravimetric | Ektimo 050; NSW EPA TM-22 ; SA EPA 03.13; USEPA method 4; USEPA method ALT 008 | ||
Blackness of smoke | Ringelmann chart | AS 3543; NSW EPA TM-16 | ||
Fluoride - Soluble | Ion selective electrode (ISE) | VIC EPA 3142 | ||
Combination of air impurities from two or more sources | Calculation | NSW EPA TM-38 | ||
Nitrogen - Oxidised | Gas analyser | USEPA method 7E | ||
Carbon dioxide (CO2) | Gas analyser | NSW EPA TM-24 | ||
Carbon dioxide - Total; Oxygen | Calculation | USEPA Performance Specification 3 | ||
Sulfur dioxide | Titration | USEPA method 6 | ||
Carbon monoxide | Calculation | USEPA CEMS Performance Specification 4; USEPA CEMS Performance Specification 4A | ||
Emissions - Stationary sources | Particulate matter - Non-sulfuric acid | Gravimetric | USEPA method 5B | |
Meteorological monitoring | Atmosphere | Pressure; Rainfall; Relative humidity (RH); Temperature; Wind direction; Wind speed - Horizontal | Barometer; Hygrometer; Rainfall gauge; Temperature probe; Ultrasonic anemometer | AS 3580.14 |
Sample collection | Air - Ambient | Not applicable | Filter paper | AS 3580.10.1 |
Not applicable | High volume air sampler (HVAS) | AS 3580.9.3 - Total suspended particulates (TSP) - high volume sampler | ||
Not applicable | Canisters | USEPA method TO-15 | ||
Not applicable | Siting of air monitoring equipment | AS 3580.1.1 | ||
Sample collection - Stack and emissions sampling | Emissions - Industrial | Particulate matter; Principal organic hazardous compounds (POHCs) | Impinger/sorbent tube; Isokinetic | USEPA SW846 method 0010 - Modified method 5 sampling train |
Sulfur oxides | Filter/impinger | ISO 7934 | ||
Aldehydes; Ketones | Impinger | USEPA SW846 method 0011 | ||
Fluoride - Total | Filter/impinger | USEPA method 13B - Determination of total fluoride emissions from stationary sources (specific ion electrode method); | ||
Sulfur dioxide | To be determined | ISO 7935; USEPA method 6C | ||
Cresol; Phenols | Impinger | USEPA method CTM 32 - Cresols; phenols by impinger | ||
Hydrogen chloride | Impinger | NSW EPA TM-8 | ||
Methylene diphenyl diisocyanate (MDI, isocyanate MDI, diphenylmethane diisocyanate); Toluene-2,4-diisocyanate (2,4-TDI) | Impinger | VIC EPA 4210 ; Ektimo 350 | ||
Particulate matter - PM10 | Filter/impinger; Isokinetic | Ektimo 121 | ||
Cadmium; Mercury | Filter/impinger; Isokinetic | NSW EPA TM-14 | ||
Oxidants | Impinger | Ektimo 310 | ||
Cresol; Phenols; Resorcinol | Impinger | Ektimo 320 | ||
Sulfur dioxide | Filter/impinger | ISO 11632; NSW EPA TM-4; USEPA method 6 | ||
Hydrogen chloride | Impinger | USEPA method 26 - Determination of hydrogen chloride emissions from stationary sources - isokinetic method | ||
Sampling points - Selection | To be determined | SA EPA 03.09; AS 4323.1; NSW EPA TM-1; USEPA method 1 | ||
Particulate matter | Filter/impinger; Isokinetic | AS4323.2; ISO 9096; NSW EPA TM-15; SA EPA 03.01 ; USEPA method 5; USEPA method 5B ; USEPA method 17; VDI 2066 | ||
Sulfur trioxide (sulfuric anhydride); Sulfuric acid mist | Filter/impinger | NSW EPA TM-3 | ||
Antimony; Arsenic; Cadmium; Lead; Mercury | Filter/impinger; Isokinetic | NSW EPA TM-12 | ||
Fluorine; Fluorine compounds | Filter/impinger | NSW EPA TM-9; SA EPA 03.03 | ||
Beryllium; Chromium; Cobalt; Manganese; Nickel; Selenium; Tin; Vanadium | Filter/impinger; Isokinetic | NSW EPA TM-13 | ||
Particulate matter - PM10; Particulate matter - PM2.5 | Filter/impinger; Isokinetic | USEPA method 201A; NSW EPA OM-5 | ||
Dioxins; Furans | XAD-2 resin/filter | NSW EPA TM-18; USEPA method 23 - Determination of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans from municipal waste combustors; USEPA method 23A - dioxins, polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofuran | ||
Cyanide | Impinger | Ektimo 270 | ||
Oil mist; Organic fumes; Plasticisers | Filter/impinger | Ektimo 355 | ||
Fluoride - Water soluble | Filter/impinger | VIC EPA 3142 | ||
Fluoride | Filter/impinger | Ektimo 240 | ||
Ammonia | Impinger | Ektimo 260; USEPA method CTM 27 - Ammonia by impinger | ||
Bromide; Chloride; Fluoride; Halogens; Sulfate | Impinger | Ektimo 235 | ||
Chlorine | Impinger | NSW EPA TM-7 | ||
Chromium | Filter/impinger; Isokinetic | USEPA method 306 - Determination of chromium emissions from decorative and hard chromium electroplating and chromium anodizing operations - isokinetic method | ||
Hydrogen sulfide | Filter/impinger | Ektimo 255; NSW EPA TM-5; USEPA method 11; VIC EPA B18 | ||
Sulfur oxides; Sulfuric acid mist | Filter/impinger | SA EPA 03.02; USEPA method 8 | ||
Particulate matter; Particulate matter - PM10; Particulate matter - PM2.5 | Cyclone; Isokinetic | USEPA method CTM 40 - Particulate matter - PM10;PM2.5 by cyclone | ||
Polycyclic aromatic hydrocarbons (PAHs) | Dilution/filter/condensation/adsorption - Isokinetic; Impinger/sorbent tube; XAD-2 resin | CARB 429 - Determination of polycyclic aromatichydrocarbon (PAH) emissions from stationary sources; ISO 11338-1; ISO 11338-2; NSW EPA OM-6; USEPA SW-846 method 0010 - Polyaromatic hydrocarbon by XAD-2 resin | ||
Chromium VI (hexavalent chromium) | Impinger | CARB 425 - Chromium - total; hexavalent byimpinger; NSW EPA OM-3 | ||
Methanol | Impinger; Sorbent tube | USEPA method 308 - Methanol by impinger/sorbent tube | ||
Chromium - Total; Chromium VI (hexavalent chromium) | Filter/impinger; Isokinetic | NSW EPA OM-4 | ||
Acid soluble particulates; Fluoride - Gaseous | Filter paper - Manual double | AS 3580.13.2 - Determination of fluorides Gaseous and acid-soluble particulate fluorides - Manual double filter paper sampling | ||
Hydrocarbons: C1-C4; Non-condensable gases; Sulfur compounds | Tedlar bags | Ektimo 200 | ||
Antimony; Arsenic; Cadmium; Copper; Lead; Mercury | Filter/impinger; Isokinetic | SA EPA 03.07 | ||
Volatile organic compounds (VOCs) | Gas bomb; Sampling bag; Sorbent tube | USEPA method 18 - Measurement of gaseous organic compound emissions by gas chromatography; NSW EPA TM-34; VIC EPA 4230 | ||
Emissions - Industrial; Emissions - Stack | Total reduced sulfides (TRS) | Continuous monitoring | USEPA method 16C | |
Sulfur - Total reduced | Impinger | NSW EPA TM-33; USEPA method 16A - Determination of total reduced sulfur emissions from stationary sources (impinger technique) | ||
Flow rate; Pressure; Temperature; Velocity | Continuous monitoring | NSW EPA TM-2 | ||
Carbon dioxide (CO2); Oxygen | Continuous monitoring | USEPA method 3A | ||
Molecular weight - Dry | Continuous monitoring | USEPA method 3 | ||
Flow rate; Velocity | Continuous monitoring | ISO 10780; SA EPA 03.10; USEPA method 2 | ||
Emissions - Stack | Odour | Sampling bag | AS4323.3; NSW EPA OM-7 | |
Aldehydes; Ketones | Impinger/sorbent tube | ETC 390 | ||
Particulate matter - Condensable | Filter/impinger | USEPA method 202 | ||
2,5-Dimethylbenzaldehyde; 2-Methylbenzaldehyde (o-tolualdehyde); 2-Methylpropanal (isobutyraldehyde); 3-Methylbenzaldehyde (m-tolualdehyde); 3-Methylbutanal (isovaleraldehyde); 4-Methylbenzaldehyde (p-tolualdehyde); Acetaldehyde (ethanal); Acetone; Acrolein (2-propenal); Benzaldehyde (phenylmethanal); Butanone (methyl ethyl ketone, MEK, 2-butanone); Crotonaldehyde; Formaldehyde (methanal); Hexanal (hexaldehyde); Pentanal (valeraldehyde); Propionaldehyde (propanal); n-Butyraldehyde | Impinger | Ektimo 330 | ||
Moisture | Impinger | Ektimo 050; NSW EPA TM-22 ; SA EPA 03.13; USEPA method 4; USEPA method ALT 008 | ||
Nitrogen - Oxides (NOx); Sulfur dioxide | To be determined | USEPA method 20 | ||
Volatile organic compounds (VOCs) | Sorbent tube | USEPA method 0030 | ||
Nitrogen - Oxides (NOx) | To be determined | ISO 10849; NSW EPA TM-11 | ||
1,3-Butadiene; 1-Butylene (1-butene); Butane (n-butane); Dimethylether; Ethane; Ethene (ethylene); Ethyne (acetylene); Isobutane; Isobutene (iso-Butene); Methane; Propane; Propene (propylene); Vinyl chloride; cis-2-Butene; trans-2-Butene | Gas bomb; Sampling bag; Sorbent tube | Ektimo 340 | ||
Mercury | Sorbent tube | USEPA method 30B | ||
Gaseous organic compounds | To be determined | USEPA method 25A | ||
Carbon dioxide (CO2); Molecular weight - Dry | To be determined | SA EPA 03.08 | ||
2,5-Dimethylbenzaldehyde; 2-Methylbenzaldehyde (o-tolualdehyde); 2-Methylpropanal (isobutyraldehyde); 3-Methylbenzaldehyde (m-tolualdehyde); 3-Methylbutanal (isovaleraldehyde); 4-Methylbenzaldehyde (p-tolualdehyde); Acetaldehyde (ethanal); Acrolein (2-propenal); Benzaldehyde (phenylmethanal); Butanone (methyl ethyl ketone, MEK, 2-butanone); Crotonaldehyde; Cyclohexanone; Decyl aldehyde (decanal); Formaldehyde (methanal); Heptanal; Hexanal (hexaldehyde); Nonanal; Octanal; Pentanal (valeraldehyde); Propionaldehyde (propanal); n-Butyraldehyde | Sorbent tube | Ektimo 332 | ||
Nitrogen - Oxides (NOx) | To be determined | USEPA method 7E | ||
Water vapour | Filter/impinger | VIC EPA 3040 | ||
Gaseous organic compounds | To be determined | USEPA method 25B | ||
Carbon dioxide (CO2); Carbon monoxide; Nitrogen - Oxides (NOx); Oxygen; Sulfur dioxide | To be determined | SA EPA 03.14 | ||
Halogens; Hydrogen halides | Filter/impinger | USEPA method 26A | ||
Vinyl chloride | Gas bomb; Sampling bag; Sorbent tube | USEPA method 106 | ||
Carbon monoxide; Nitrogen oxide; Oxygen | To be determined | USEPA method OTM 13 | ||
Antimony; Arsenic; Barium; Beryllium; Cadmium; Chromium; Cobalt; Copper; Lead; Manganese; Mercury; Nickel; Phosphorus; Selenium; Silver; Thallium; Zinc | Filter/impinger | USEPA method 29 | ||
Oxygen | To be determined | NSW EPA TM-25 | ||
Carbon monoxide | To be determined | NSW EPA TM-32; SA EPA 03.12; USEPA method 10 | ||
Volatile organic compounds (VOCs) | Sorbent tube | USEPA method 0031 | ||
Carbon dioxide (CO2); Carbon monoxide; Oxygen | To be determined | ISO 12039 | ||
Cyclohexyl amine; Diethylamine; Diisopropyl amine; Dimethylamine; Ethylamine; Isopropylamine; Methylamine; Triethylamine | Sorbent tube | Ektimo 370 | ||
Gaseous organic compounds | To be determined | NSWEPA TM-20 | ||
1,3,5-Trimethylbenzene (1,3,5-TMB, mesitylene); 1-Butylene (1-butene); 2,5-Dimethylbenzaldehyde; 2-Ethoxyethanol (cellosolve); 2-Ethoxyethyl acetate (ethylene glycol monoethyl ether acetate, cellosolve acetate, EGMEA); 2-Methylbenzaldehyde (o-tolualdehyde); 3-Methylbenzaldehyde (m-tolualdehyde); 4-Methylbenzaldehyde (p-tolualdehyde); Acetaldehyde (ethanal); Acrylates and methacrylates: C1-C10; Acrylonitrile; Alcohols: C1-C10; Benzaldehyde (phenylmethanal); Benzene; Butane (n-butane); Butanone (methyl ethyl ketone, MEK, 2-butanone); Butylamine; Crotonaldehyde; Cyclohexanone; Decyl aldehyde (decanal); Dichloromethane (DCM, methylene chloride); Diethyl ether; Dimethylether; Esters: C1-C10; Ethylbenzene; Ethyne (acetylene); Formaldehyde (methanal); Freons; Halogenated hydrocarbons; Heptanal; Hexanal (hexaldehyde); Hydrocarbons: C1-C10; Isobutene (iso-Butene); Mercaptans; Methanol; Methylene diphenyl diisocyanate (MDI, isocyanate MDI, diphenylmethane diisocyanate); Naphthas; Nonanal; Oxirane (ethyleneoxide); Pentanal (valeraldehyde); Polycyclic aromatic hydrocarbons (PAHs); Styrene (ethenyl benzene); Toluene; Toluene-2,4-diisocyanate (2,4-TDI); Toluene-2,6- diisocyanate (2,6-TDI); Trichlorofluoromethane (freon-11, trichloromonofluoromethane); Vinyl chloride; Volatile organic compounds (VOCs); Xylene; n-Butyraldehyde | Gas bomb; Impinger; Sampling bag; Sorbent tube | Ektimo 344 | ||
Carbon dioxide (CO2) | To be determined | NSW EPA TM-24 | ||
Emissions; Soil vapour intrusion | Sampling - Area sources | Flux chamber | AS 4323.4; Ektimo130; NSW EPA method OM-8 |
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
Accreditation No.
14601
Site No.
14659
Print date
01 Sep 2024