![NATA](https://nata.com.au/files/2021/02/nata.png)
National Association of Testing Authorities, Australia
Scope of Accreditation
Bureau Veritas Asset Integrity and Reliability Services Pty Limited
Site
Newcastle Branch
Accreditation No.
1267
Site No.
1853
Date of Accreditation
20 Aug 1984
Contact
Availability
Services available to external clients
Scope of Accreditation
ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
Service | Product | Determinant | Technique | Procedure | Limitations |
---|---|---|---|---|---|
Evaluation of mechanical performance of pressure equipment | Hose and hose assemblies; Metallic storage vessels; Piping; Pressure fittings; Pressure vessels | Hydrostatic pressure | Not applicable | AS 4037 Section 17, In-house procedures P-3000-HY-0007, P-3000-ME-010 | 100 kPa to 50 MPa |
ISO/IEC 17025 (2017)
Manufactured Goods
Service | Product | Determinant | Technique | Procedure | Limitations |
---|---|---|---|---|---|
Material performance evaluation of metal products | Prepared metallic test specimens | Shear strength | Not applicable |
In-house procedure P-3000-ME-0073 |
0.4 to 1 000 kN |
Proof load; Tensile properties | Tensile tests with control of strain rate, including yield stress and proof stress |
AS 1391, ASTM A 370, ASTM E 8M, ISO 6892-1, JIS Z 2241 |
0.4 to 1 000 kN |
||
Prepared metallic test specimens; Welded test specimens | Macroscopic examination | Visual examination | AS/NZS 2205.5.1, ASME IX QW-180, QW-183, QW-184, QW-193.1.3, QW-196, AWS D1.1, ISO 9606-1, ISO 9606-2, ISO 15614-2 | ||
Bending properties | Not applicable | AS/NZS 2205.3.1, ASME IX QW-160, ASTM E 190, AWS D1.1, ISO 9606-1, ISO 9606-2, ISO 15614-1 | |||
Hardness | Vickers |
AS 1815.1, ASTM A 370, ASTM E 18 |
24.5 to 980 N |
||
Impact resistance | Charpy V-notch - Impact value |
AS 1544.2, ASTM A 370, ASTM E23, ISO 148-1 |
at ambient temperature and down to -120°C and at -196°C |
||
Hardness | Rockwell - Scale B; Rockwell - Scale C |
AS 1815.1, ASTM A 370, ASTM E 18 |
|||
Hardness | Brinell |
AS 1816.1, ASTM A 370, ASTM E 10 |
4.9 to 29.4 kN |
||
Reinforcing bar and steel prestressing materials for concrete | Bending properties; Geometric properties; Mass per unit length | Longitudinal guided bend; Mass per unit length; Rib geometry |
AS/NZS 4671 clause 7.2.3, AS/NZS 4671 Appendix C3.1, AS/NZS 4671 Appendix C 3.3 |
||
Proof load; Tensile properties | Longitudinal tensile; Uniform elongation (Agt) |
AS/NZS 4671 Appendix C2 |
0.4 to 1 000 kN |
||
Threaded fasteners, bolts and nuts | Charpy impact toughness; Hardness; Impact resistance; Shear strength; Tensile properties | Brinell; Rockwell - Scale B; Rockwell - Scale C; Vickers |
AS 1815.1, AS 1816.1, AS 1817.1, AS 4291.1, AS/NZS 1559, AS/NZS 4291.2 |
0.4 to 1 000 kN |
|
Breaking load; Proof load | Not applicable |
AS 1112.1,.2,.3 and .4, AS 4291.1, AS/NZS 1559 clause 2.4, AS/NZS 4291.2 |
0.4 to 1 000 kN |
||
Tubing/piping | Flaring ductility; Flattening properties | Not applicable |
ASTM A370 Clause A2.5, ASTM A1016 |
||
Welded test specimens | Fracture test | Macroscopic examination; Visual examination |
AS/NZS 2205.4.1, ASME IX QW-180,QW-182, AWS D1.1, ISO 9606-1, ISO 9606-2 |
||
Wire, wire strands and coated wire products | Tensile properties | Longitudinal tensile |
AS 1391, ASTM A370 |
0.4 to 1 000 kN |
ISO/IEC 17025 (2017)
Materials
Service | Product | Determinant | Technique | Procedure | Limitations |
---|---|---|---|---|---|
Metallic corrosion evaluation | Plating | Coating thickness | Microscopic examination |
AS 2331.1.1 |
|
Metallographic evaluation of metals and alloys | Aluminium and aluminium alloys; Austenitic, duplex and nickel-chromium alloys; Copper and copper alloys; Ferrous materials; Magnesium alloys; Nickel and nickel alloys; Titanium and titanium alloys | Case depth and depth of decarburisation; Depth of surface defects; Graphite type and distribution in cast irons; Phase identification and proportion | Hardness traverse; Macroscopic examination; Microhardness; Microscopic examination |
AS 1831, AS 1982, AS 2003, AS 2028, AS 5049, ASTM E 562, in-house procedure P-3000-MI-0003 |
|
Aluminium and aluminium alloys; Austenitic, duplex and nickel-chromium alloys; Copper and copper alloys; Ferrous materials; Nickel and nickel alloys | Grain size | Microscopic examination |
AS 1733, ASTM E112 |
Using the comparison technique, excluding thermal treatment |
|
Aluminium and aluminium alloys; Austenitic, duplex and nickel-chromium alloys; Ferrous materials; Magnesium alloys; Nickel and nickel alloys; Titanium and titanium alloys | Macroscopic examination | Macroscopic examination |
AS/NZS 2205.5.1, ASME IX QW-180, QW-183, QW-184, QW-193.1.3, QW-196, AWS D1.1, ISO 9606-1, ISO 9606-2, ISO 15614-2 |
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
Accreditation No.
1267
Site No.
1853
Print date
27 Jul 2024