SRG Global Asset Care Pty Ltd

Site

Perth Mechanical Testing Laboratory

Accreditation No.

218

Site No.

1324

Date of Accreditation

27 Jul 1978

Address

109 Bannister Road
Canning Vale, WA 6155
Australia

srgglobal.com.au

Contact

Mr Lee McIntyre P: +61 (08) 92320300

Availability

Services available to external clients

Scope of Accreditation

Print scopes
Perth Mechanical Testing Laboratory

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of metal products Prepared metallic test specimens Impact resistance Charpy V-notch - Impact value

ASTM A370, ASTM E23, ISO 148-1, AS 1544.2

at ambient temperature and down to -75°C and at -196°C

minimum specified energy is ≤ 100J for AS 1544.2
Tensile properties Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Wedge tensile

AS 1391, ASTM E8M

1 to 1800 kN with control of maximum strain rate
Hardness Brinell

AS 1816.1

4.9 kN to 29.4 kN
Bending properties Not applicable

AS 2505.1, .2, .4
Hardness Rockwell - Scale B; Rockwell - Scale C

AS 1815.1, ASTM E18

Tests using B and C scales
Hardness Vickers

AS 1817.1, ASTM E384

9.8 to 980 N
Welded test specimens Impact resistance Charpy V-notch - Impact value

AS 1544.2, AS 2205 7.1, ASTM E23

at ambient temperature and down to -75°C and at -196°C

minimum specified energy is ≤ 100J for AS 1544.2
Macroscopic examination Macroscopic examination


AS/NZS 2205 5.1, ASME IX Article I QW183 and QW184, ANSI/AWS D 1.1 Section 4
Hardness Rockwell - Scale B; Rockwell - Scale C

AS 1815.1

B and C scales
Fillet-break fracture; Fracture test Macroscopic examination; Visual examination


AS/NZS 2205 4.1, ANSI/AWS D1.1 Section 4
Tensile properties All-weld-metal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Wedge tensile

ANSI/AWS D1.1 Section 4, API 1104 Section 5.6.2, AS 1391, AS 2205 2.1, 2.2, ASME IX Article IV QW462, QB451

1 to 1800 kN with control of maximum strain rate
Fracture test; Nick-break fracture Macroscopic examination; Visual examination

API 1104 Section 5.6.3, AS/NZS 2205 4.1
Bending properties Transverse guided bend

API 1104 Section 5.6.4 and 5.6.5, AS/NZS 2205 3.1, AS 2205 3.2, AS 2205 3.3, AS 2205 3.4, ASME IX article IV QW-466 
Hardness Vickers

AS 1817.1, ASTM E384

9.8 to 980 N

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.