The Crane Industry Council of Australia

Site

CraneSafe National Inspectorate

The Crane Industry Council of Australia

Accreditation No.

19898

Site No.

23272

Date of Accreditation

09 Jan 2017

Address

Unit 10, 18-22 Lexia Place
Mulgrave, VIC 3170
Australia

cranesafe.com.au

Contact

Mr Patrick Cran P: +61 (03) 95010078

Availability

Type A Inspection Body

Scope of Accreditation

Print scopes
CraneSafe National Inspectorate

ISO/IEC 17020 (2012)

Infrastructure and Asset Integrity

Service Product Determinant Procedure Limitations
Evaluation of load generating lifting appliances Crane components Commissioning inspection; In-service inspection; Periodic inspection Covering standards, codes and specifications addressing the service, including AS 2759, section 13 & 14. Limited to the visual inspection of wire ropes for corrosion, detection of broken wires, fretting, material (cross-sectional area loss) and detection, mechanical damage and wear.
Cranes - Mobile Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Mobile cranes including development of crane-specific inspection and inspector criteria as determined by peak industry body, limited to the following crane types:

  • all-terrain mobile (ATC),
  • articulated mobile (AC),
  • hydraulic boom crawler (HBCC),
  • lattice boom crawler and lattice boom crawler piling (LBCC and LBCP respectively),
  • hydraulic truck (HTC),
  • lattice boom truck (LBTC),
  • overhead traveling bridge (OTBC),
  • pole handler borer (PHB),
  • reach stacker full load (RSFL),
  • rough terrain (RTC),
  • side boom pipe layer (SBPL),
  • telescopic handler - rigid and rotating (THRI & THRO respectively),
  • truck mounted concrete pump (TMCP) and
  • vehicle loading (VLC).
Cranes - Tower Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-assembly inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Tower cranes limited to the pre-erection, commissioning and/or annual inspection of the following tower cranes:

  • self-erecting tower (SETC),
  • diesel luffing jib tower (DLTC),
  • luffing jib tower (LJTC) and
  • hammerhead tower (HHTC).
New South Wales and Australian Capital Territory

ISO/IEC 17020 (2012)

Infrastructure and Asset Integrity

Service Product Determinant Procedure Limitations
Evaluation of load generating lifting appliances Crane components Commissioning inspection; In-service inspection; Periodic inspection Covering standards, codes and specifications addressing the service, including AS 2759, section 13 & 14. Limited to the visual inspection of wire ropes for corrosion, detection of broken wires, fretting, material (cross-sectional area loss) and detection, mechanical damage and wear.
Cranes - Mobile Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Mobile cranes including development of crane-specific inspection and inspector criteria as determined by peak industry body, limited to the following crane types:

  • all-terrain mobile (ATC),
  • articulated mobile (AC),
  • hydraulic boom crawler (HBCC),
  • lattice boom crawler and lattice boom crawler piling (LBCC and LBCP respectively),
  • hydraulic truck (HTC),
  • lattice boom truck (LBTC),
  • overhead traveling bridge (OTBC),
  • pole handler borer (PHB),
  • reach stacker full load (RSFL),
  • rough terrain (RTC),
  • side boom pipe layer (SBPL),
  • telescopic handler - rigid and rotating (THRI & THRO respectively),
  • truck mounted concrete pump (TMCP) and
  • vehicle loading (VLC).
Cranes - Tower Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-assembly inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Tower cranes limited to the pre-erection, commissioning and/or annual inspection of the following tower cranes:

  • self-erecting tower (SETC),
  • diesel luffing jib tower (DLTC),
  • luffing jib tower (LJTC) and
  • hammerhead tower (HHTC).
Northern Territory

ISO/IEC 17020 (2012)

Infrastructure and Asset Integrity

Service Product Determinant Procedure Limitations
Evaluation of load generating lifting appliances Crane components Commissioning inspection; In-service inspection; Periodic inspection Covering standards, codes and specifications addressing the service, including AS 2759, section 13 & 14. Limited to the visual inspection of wire ropes for corrosion, detection of broken wires, fretting, material (cross-sectional area loss) and detection, mechanical damage and wear.
Cranes - Mobile Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Mobile cranes including development of crane-specific inspection and inspector criteria as determined by peak industry body, limited to the following crane types:

  • all-terrain mobile (ATC),
  • articulated mobile (AC),
  • hydraulic boom crawler (HBCC),
  • lattice boom crawler and lattice boom crawler piling (LBCC and LBCP respectively),
  • hydraulic truck (HTC),
  • lattice boom truck (LBTC),
  • overhead traveling bridge (OTBC),
  • pole handler borer (PHB),
  • reach stacker full load (RSFL),
  • rough terrain (RTC),
  • side boom pipe layer (SBPL),
  • telescopic handler - rigid and rotating (THRI & THRO respectively),
  • truck mounted concrete pump (TMCP) and
  • vehicle loading (VLC).
Cranes - Tower Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-assembly inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Tower cranes limited to the pre-erection, commissioning and/or annual inspection of the following tower cranes:

  • self-erecting tower (SETC),
  • diesel luffing jib tower (DLTC),
  • luffing jib tower (LJTC) and
  • hammerhead tower (HHTC).
Papua New Guinea

ISO/IEC 17020 (2012)

Infrastructure and Asset Integrity

Service Product Determinant Procedure Limitations
Evaluation of load generating lifting appliances Crane components Commissioning inspection; In-service inspection; Periodic inspection Covering standards, codes and specifications addressing the service, including AS 2759, section 13 & 14. Limited to the visual inspection of wire ropes for corrosion, detection of broken wires, fretting, material (cross-sectional area loss) and detection, mechanical damage and wear.
Cranes - Mobile Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Mobile cranes including development of crane-specific inspection and inspector criteria as determined by peak industry body, limited to the following crane types:

  • all-terrain mobile (ATC),
  • articulated mobile (AC),
  • hydraulic boom crawler (HBCC),
  • lattice boom crawler and lattice boom crawler piling (LBCC and LBCP respectively),
  • hydraulic truck (HTC),
  • lattice boom truck (LBTC),
  • overhead traveling bridge (OTBC),
  • pole handler borer (PHB),
  • reach stacker full load (RSFL),
  • rough terrain (RTC),
  • side boom pipe layer (SBPL),
  • telescopic handler - rigid and rotating (THRI & THRO respectively),
  • truck mounted concrete pump (TMCP) and
  • vehicle loading (VLC).
Cranes - Tower Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-assembly inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Tower cranes limited to the pre-erection, commissioning and/or annual inspection of the following tower cranes:

  • self-erecting tower (SETC),
  • diesel luffing jib tower (DLTC),
  • luffing jib tower (LJTC) and
  • hammerhead tower (HHTC).
Queensland

ISO/IEC 17020 (2012)

Infrastructure and Asset Integrity

Service Product Determinant Procedure Limitations
Evaluation of load generating lifting appliances Crane components Commissioning inspection; In-service inspection; Periodic inspection Covering standards, codes and specifications addressing the service, including AS 2759, section 13 & 14. Limited to the visual inspection of wire ropes for corrosion, detection of broken wires, fretting, material (cross-sectional area loss) and detection, mechanical damage and wear.
Cranes - Mobile Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Mobile cranes including development of crane-specific inspection and inspector criteria as determined by peak industry body, limited to the following crane types:

  • all-terrain mobile (ATC),
  • articulated mobile (AC),
  • hydraulic boom crawler (HBCC),
  • lattice boom crawler and lattice boom crawler piling (LBCC and LBCP respectively),
  • hydraulic truck (HTC),
  • lattice boom truck (LBTC),
  • overhead traveling bridge (OTBC),
  • pole handler borer (PHB),
  • reach stacker full load (RSFL),
  • rough terrain (RTC),
  • side boom pipe layer (SBPL),
  • telescopic handler - rigid and rotating (THRI & THRO respectively),
  • truck mounted concrete pump (TMCP) and
  • vehicle loading (VLC).
Cranes - Tower Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-assembly inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Tower cranes limited to the pre-erection, commissioning and/or annual inspection of the following tower cranes:

  • self-erecting tower (SETC),
  • diesel luffing jib tower (DLTC),
  • luffing jib tower (LJTC) and
  • hammerhead tower (HHTC).
South Australia

ISO/IEC 17020 (2012)

Infrastructure and Asset Integrity

Service Product Determinant Procedure Limitations
Evaluation of load generating lifting appliances Crane components Commissioning inspection; In-service inspection; Periodic inspection Covering standards, codes and specifications addressing the service, including AS 2759, section 13 & 14. Limited to the visual inspection of wire ropes for corrosion, detection of broken wires, fretting, material (cross-sectional area loss) and detection, mechanical damage and wear.
Cranes - Mobile Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Mobile cranes including development of crane-specific inspection and inspector criteria as determined by peak industry body, limited to the following crane types:

  • all-terrain mobile (ATC),
  • articulated mobile (AC),
  • hydraulic boom crawler (HBCC),
  • lattice boom crawler and lattice boom crawler piling (LBCC and LBCP respectively),
  • hydraulic truck (HTC),
  • lattice boom truck (LBTC),
  • overhead traveling bridge (OTBC),
  • pole handler borer (PHB),
  • reach stacker full load (RSFL),
  • rough terrain (RTC),
  • side boom pipe layer (SBPL),
  • telescopic handler - rigid and rotating (THRI & THRO respectively),
  • truck mounted concrete pump (TMCP) and
  • vehicle loading (VLC).
Cranes - Tower Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-assembly inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Tower cranes limited to the pre-erection, commissioning and/or annual inspection of the following tower cranes:

  • self-erecting tower (SETC),
  • diesel luffing jib tower (DLTC),
  • luffing jib tower (LJTC) and
  • hammerhead tower (HHTC).
Tasmania

ISO/IEC 17020 (2012)

Infrastructure and Asset Integrity

Service Product Determinant Procedure Limitations
Evaluation of load generating lifting appliances Crane components Commissioning inspection; In-service inspection; Periodic inspection Covering standards, codes and specifications addressing the service, including AS 2759, section 13 & 14. Limited to the visual inspection of wire ropes for corrosion, detection of broken wires, fretting, material (cross-sectional area loss) and detection, mechanical damage and wear.

Covering activities from Australian offices at Melbourne, Perth, Brisbane, Sydney, Adelaide, Darwin and Papua New Guinea.
Cranes - Mobile Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Mobile cranes including development of crane-specific inspection and inspector criteria as determined by peak industry body, limited to the following crane types:

  • all-terrain mobile (ATC),
  • articulated mobile (AC),
  • hydraulic boom crawler (HBCC),
  • lattice boom crawler and lattice boom crawler piling (LBCC and LBCP respectively),
  • hydraulic truck (HTC),
  • lattice boom truck (LBTC),
  • overhead traveling bridge (OTBC),
  • pole handler borer (PHB),
  • reach stacker full load (RSFL),
  • rough terrain (RTC),
  • side boom pipe layer (SBPL),
  • telescopic handler - rigid and rotating (THRI & THRO respectively),
  • truck mounted concrete pump (TMCP) and
  • vehicle loading (VLC).

Covering activities from Australian offices at Melbourne, Perth, Brisbane, Sydney, Adelaide, Darwin and Papua New Guinea.
Cranes - Tower Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-assembly inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Tower cranes limited to the pre-erection, commissioning and/or annual inspection of the following tower cranes:

  • self-erecting tower (SETC),
  • diesel luffing jib tower (DLTC),
  • luffing jib tower (LJTC) and
  • hammerhead tower (HHTC).

Covering activities from Australian offices at Melbourne, Perth, Brisbane, Sydney, Adelaide, Darwin and Papua New Guinea.
Western Australia

ISO/IEC 17020 (2012)

Infrastructure and Asset Integrity

Service Product Determinant Procedure Limitations
Evaluation of load generating lifting appliances Crane components Commissioning inspection; In-service inspection; Periodic inspection Covering standards, codes and specifications addressing the service, including AS 2759, section 13 & 14. Limited to the visual inspection of wire ropes for corrosion, detection of broken wires, fretting, material (cross-sectional area loss) and detection, mechanical damage and wear.
Cranes - Mobile Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Mobile cranes including development of crane-specific inspection and inspector criteria as determined by peak industry body, limited to the following crane types:

  • all-terrain mobile (ATC),
  • articulated mobile (AC),
  • hydraulic boom crawler (HBCC),
  • lattice boom crawler and lattice boom crawler piling (LBCC and LBCP respectively),
  • hydraulic truck (HTC),
  • lattice boom truck (LBTC),
  • overhead traveling bridge (OTBC),
  • pole handler borer (PHB),
  • reach stacker full load (RSFL),
  • rough terrain (RTC),
  • side boom pipe layer (SBPL),
  • telescopic handler - rigid and rotating (THRI & THRO respectively),
  • truck mounted concrete pump (TMCP) and
  • vehicle loading (VLC).
Cranes - Tower Commissioning inspection; In-operation inspection; In-service inspection; Periodic inspection; Pre-assembly inspection; Pre-use inspection

Covering standards, codes and specifications addressing the service, including AS/NZS 1418 series, AS 2550 series and client specification.

Tower cranes limited to the pre-erection, commissioning and/or annual inspection of the following tower cranes:

  • self-erecting tower (SETC),
  • diesel luffing jib tower (DLTC),
  • luffing jib tower (LJTC) and
  • hammerhead tower (HHTC).

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.